xAdjusts the focus.
Focus adjustment shall be performed when camera | Focus lock knob | ||
angle adjustment are performed. | |||
|
| ||
Adjust the focus by following the adjusting proce- |
|
| |
dure of q, w, and e shown below. |
|
| |
q Loosen the zoom lock knob and move the knob | Zoom lock knob | FAR | |
between TELE and WIDE to obtain the appro- |
| TELE | |
priate angle of view, and then tighten the zoom |
| ||
|
| ||
lock knob. |
|
| |
w Loosen the focus lock knob, make coarse |
|
| |
adjustment of the focus, and then tighten the |
|
| |
focus lock knob. |
|
| |
e Perform major adjustment of back focus |
|
|
through the setup menu or perform major
adjustment by following Steps 3 and 4 below (+ Operating Instructions (PDF)).
NEAR
WIDE
Note:
•Reset the back focus position to the CS mount default position before the back focus adjust- ment. (Hold down the right and left buttons simultaneously for 2 seconds or more, or move the cursor to
cPress the [ABF1] button after adjusting the view angle while viewing the monitor for adjustment.
The ABF operation indicator (+ page 12) lights, the focus position is displayed in the lower part of the screen, and the back focus is automatically adjusted.
NEARFAR
...................
INDICATOR XXXX FOCUSING
25