Troubleshooting
Before asking for repairs, check the symptoms with the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below.
Symptom
No image displayed
Blurred image
Damaged power cord sheathing
Heated portion of power line consisting of power cord during use
Warmed power cord or loos- ened connection by bending or stretching during use
Cause/solution | Reference | |
pages | ||
| ||
|
| |
|
| |
• Are the power cord and coaxial cable |
| |
connected appropriately? | 30 | |
→ Check whether the connection is | ||
| ||
appropriately established. |
| |
• Is the adjusting monitor connected ? |
| |
→ Check whether connection is estab- | 24 | |
lished. |
| |
• Is the monitor brightness appropriately |
| |
adjusted, or is the contrast appropriately | – | |
adjusted? | ||
→ Check whether the monitor settings |
| |
are appropriate. |
| |
• Were the shock absorbers in the dome |
| |
cover already removed? | – | |
→ Confirm whether the shock absorbers | ||
| ||
have been already removed. |
| |
|
| |
• Is the dome cover free from contamina- |
| |
tion and/or flaws? | – | |
→ Check the dome cover. |
| |
• Is the focus adjusted correctly? |
| |
→ Check if the focus is adjusted correct- | 25 | |
ly. |
| |
• Is the lens of the camera soiled with dirt |
| |
or dust? | – | |
→ Check whether the lens of the camera | ||
| ||
is clean. |
| |
|
| |
The power cord and connector is dam- |
| |
aged. Use of the damaged cord or con- | – | |
nector may cause electric shock or fire. | ||
Turn off the power immediately and request |
| |
repair to your dealer. |
| |
|
|
38