wEngage the attachment mounting screw of the camera with the camera mounting hole of the camera attachment and rotate the camera in the direction of the arrow to the "LOCK" position to secure the camera to the camera attachment without any back- lash.
LOCK | OPEN |
|
Projections 
LOCK | OPEN |
|
eConnect the power cord and the video output cable at the side of the mounting
base. (+ page 30)
Apply waterproof treatment to the con- nected section. (+ page 28)
Make cable connections.
rAccommodate the connected cables inside the cable guide of the mounting base.
Important:
• To prevent the cables from being caught when the cover is attached, keep the cables inside the cable guide.
Cable guide
Connected cable
Cable guide
21
