Screenshot 3
The selected setup screen in the setup menu appears on the screen.
**CAMERA SETUP**
SCENE1 |
|
|
| ALC |
|
|
|
|
|
|
ALC |
|
|
|
|
|
|
|
|
| |
|
|
|
| |||||||
|
|
|
| |||||||
SHUTTER | OFF | |||||||||
AGC | ON(HIGH) | |||||||||
SENS UP | OFF | |||||||||
WHITE BAL | ATW1 |
|
|
|
| |||||
| ||||||||||
| ||||||||||
DNR | HIGH | |||||||||
BW MODE | AUTO1 |
|
| |||||||
| ||||||||||
| ||||||||||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| |||
RET TOP END |
|
|
|
|
|
|
| |||
Note:
•If the top screen of the setup menu is called up with the operation buttons while a camera image is displayed, the setup mode is always "DISABLE" to prevent operation errors. To configure the settings in the setup menu, change the setup mode to "ENABLE".
•The cursor is a reversely highlighted part.
Step 4
Perform the settings for each item.
•Selection of setting item:
Press the up or down button to move the cursor.
•Change of settings:
Press the right or left button.
•Display of advanced setup screen:
Press the setting button when "O" is attached to the target setting item.
•Return to previous setup screen:
Move the cursor to "RET" and press the setting button.
•Return to the top screen:
Move the cursor to "TOP" and press the setting button.
Step 5
To return to the camera image screen, move the cursor to "END" and press the setting but- ton.
36
