Shark V1510 Precautionary Measures, Operating Instructions, Using The Unit As A Hand Vacuum

Models: V1510

1 6
Download 6 pages 45.75 Kb
Page 3
Image 3
PRECAUTIONARY MEASURES

PRECAUTIONARY MEASURES

OPERATING INSTRUCTIONS

IMPORTANT:If the suction opening of the hose is BLOCKED, switch off the vacuum cleaner and remove the blocking substance before you start the unit again.

1. Do not operate the vacuum

4. When pulling out the power plug

cleaner too close to heaters or

from the wall outlet, pull the plug

radiators.

not the power cord.

WARNING: Always unplug from electrical outlet before opening the dust cup (container).

Note: HEPA dust cup filter must be used when operating the hand vacuum.

Using The Unit As A Hand

Vacuum

1.Insert the dusting brush/hose connector into the brush chamber exhaust port. Lock the flexible hose in place by clipping the hose into the hose holder. (Fig. 1)

3.To use the flexible hose with the dusting brush, hold the hose in one hand and with the other, pull out the dusting brush and turn clockwise to lock in place. (Fig. 4)

Fig. 4

2.Before inserting the power plug into the wall outlet, make sure that your hands are dry.

3.Before you start vacuuming, make sure to remove large or sharp objects that might damage the HEPA Filter.

5.Do not pick up anything that is burning or smoking such as cigarettes, matches or hot ashes.

6.Do not use without HEPA filter in place.

7.Do not bend, trample or pull the hose by force. Do not operate with a damaged hose.

8.When vacuuming fine dust particles such as gyproc dust, flour or any other fine dust, empty the dust cup and "TAPCLEAN" the dust cup filter frequently to avoid over heating the motor.

Fig. 1

Cleaning With the Hose

To use the hand vacuum with only the hose and the dusting brush or crevice tool:

1.Rotate the brush cover by pushing on the brush cover release button until it clicks in place. (Fig. 2)

2.Remove the flexible hose from the brush chamber exhaust port and take the hose out from the hose holder. (Fig. 3)

4.To use the flexible hose with the crevice tool, make sure that the brush is in the storage position and insert the crevice tool into the opening of the hose. (Fig. 5)

Fig. 5

CAUTION: The hand vacuum is a very powerful unit. Make sure that you hold it firmly, otherwise it can slip out of your hand and cause injury.

Fig. 2

Fig. 3

3

4

Page 3
Image 3
Shark V1510 Precautionary Measures, Operating Instructions, Using The Unit As A Hand Vacuum, Cleaning With the Hose