TROUBLE SHOOTING GUIDE
PROBLEM |
| POSSIBLE REASON |
| POSSIBLE SOLUTION | |
|
|
|
|
| |
| 1. | Power cord not firmly plugged | 1. | Plug unit in firmly. | |
| 2. | Check fuse or breaker. | |||
HAND VACUUM |
| into outlet. | |||
|
| Replace fuse/reset breaker. | |||
WILL NOT | 2. | No power in wall outlet. |
| ||
3. Call 1 (800) | |||||
OPERATE | 3. | Needs servicing. | |||
4. | Turn the unit off and unplug | ||||
| 4. | Thermostat has tripped. | |||
|
| from outlet. | |||
|
|
|
| ||
|
|
|
|
| |
|
|
| 1. | Allow unit to cool down, | |
|
|
|
| then Restart. Empty dust | |
|
|
| 2. | cup – (see page 5). | |
HAND VACUUM | 1. | Dust cup is full. | Turn unit off and unplug | ||
| from wall outlet. Remove | ||||
WILL NOT | 2. | Unit clogged. |
| ||
| HEPA Dust Cup Filter and | ||||
OR SUCTION | 3. | HEPA Dust Cup Filter needs |
| ||
| check for object(s) in air | ||||
POWER IS WEAK |
| cleaning or replacing. |
| ||
|
| duct and remove. | |||
|
|
| 3. | ||
|
|
| Clean or replace HEPA | ||
|
|
|
| Dust Cup Filter. | |
|
|
|
| (see page 5) | |
|
|
|
|
| |
| 1. | Dust cup is full. | 1. | Empty dust cup. | |
| 2. | Review HEPA Dust Cup | |||
DUST ESCAPING | 2. | HEPA Dust Cup Filter is not | |||
| Filter instructions. | ||||
FROM HAND |
| installed correctly. |
| ||
|
| (see page 5) | |||
VACUUM | 3. | There is a puncture/hole in |
| ||
3. | Replace HEPA dust cup | ||||
|
| HEPA Dust Cup Filter. | |||
|
|
| filter. (see page 5) | ||
|
|
|
| ||
|
|
|
|
| |
HAND VACUUM | 1. | Hose clogged. | 1. | Remove hose and/or | |
HOSE OR |
| brushes. Remove | |||
BRUSHES WILL | 2. | Dust cup is full. |
| obstruction from hose. | |
NOT |
|
| 2. Empty and clean dust cup. | ||
|
|
|
|
| |
7
ORDERING REPLACEMENT DUST CUP FILTERS
FOR REPLACEMENT FILTER INFORMATION
for Model V1510
Call: | 1 (800) |
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
Or visit our website: www.sharkvac.com
Item | Part # |
|
|
Replacement HEPA Filter | XF1510 |
|
|
For Technical Support
for Model V1510
Call: | 1 (800) |
Monday to Friday 8:30 | A.M. - 5:00 P.M. Eastern Standard Time |
Please Note:
The HEPA Dust Cup Filter is washable. It should, however, be replaced every six (6) months to ensure peak performance of your vacuum.
Important:
Make sure that HEPA filter is completely dry before
8
