Onkyo TX-SR603X instruction manual IntelliVolume, Setting Preferences, Then press Enter

Advanced Setup—Continued

IntelliVolume

You can set the input level for each input source. This is useful if some of your AV components are louder or qui- eter than others.

While this menu is shown onscreen, you can select each input source and set the levels while listening to and comparing them.

1Press the [RECEIVER] button fol-

RECEIVER lowed by the [SETUP] button.

The main menu appears onscreen.

2	Use the Up and Down [ ]/[ ]
	buttons to select “7. Input

ENTER	Setup,” and then press [ENTER].
	The Input Setup menu appears.
ENTER

3Use the INPUT SELECTOR but-

tons on the remote controller to select the input source that you want to set.

4	Use the Up and Down [ ]/[ ]
	buttons to select
ENTER	“a. IntelliVolume.”
	If a component is too loud compared to
	your other components, use the Left
	[ ] button to adjust the level. If it’s too
	quiet, use the Right [ ] button.

•The level can be set from –6 dB to +6 dB.

Setting Preferences

This section explains the items on the Preference menu.

1Press the [RECEIVER] button fol-

RECEIVER lowed by the [SETUP] button.

The main menu appears onscreen.

2	Use the Up and Down [ ]/[ ]
	buttons to select “8. Preference,”

ENTER	and then press [ENTER].
	The Preference menu appears.
ENTER

3	Use the Up and Down [ ]/[	]
	buttons to select the settings,
ENTER	and use the Left and Right [	]/
	[ ] buttons to set them.

The settings are explained on page 72.

4When you’ve finished, press the

[SETUP] button.

The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

71