Pioneer PDA-5002 Connection to a personal computer, Connection of separate Sync analog RGB Source

Page 9

Installation and Connections

Connection of composite SYNC analog RGB

source

Make composite SYNC connections for a component with output that has the vertical synchronization signal layered on top of the horizontal synchronization signal.

When connecting to INPUT1

 

 

 

 

INPUT1

OUTPUT

 

ANALOG RGB

 

 

(ANALOG RGB)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

On-screen setup is necessary after connection. Please see pages 14 and 15.

When connecting to INPUT2

(ON SYNC)

 

INPUT2

(H/V SYNC)

 

G

B

R

HD

VD

75Ω Ô2k.Ω2

When using INPUT2, set the impedance selector switch to match the output impedance of the connected component’s synchronization signal.

When the output impedance of the component’s synchronization signal is above 75 Ω, set this switch to the 2.2 kΩ position.

On-screen setup is necessary after connection. Please see pages 14 and 15.

Notes

÷When making composite SYNC connections, do not connect anything to the VD jack. If connected to, the picture may not be displayed properly.

÷On some types of Macintosh® components, G ON SYNC and composite SYNC are both output. With this type of component, please connect using the G ON SYNC connection (as shown left).

Connection to a personal computer

Connection method differs depending on the computer type. When connecting, please thoroughly read the computer’s instruction manual.

Before making connections, be sure to make sure that the personal computer’s power and display’s main power is off.

For the PC input signals and screen sizes that the display is compatible with, please refer to the plasma display’s Operating Instructions.

Connection of separate SYNC analog RGB

source

Make separate SYNC connections for a personal computer that has RGB output separated into 5 output signals: green, blue, red, horizontal synchronization signal, and vertical synchronization signal.

When connecting to INPUT2

(ON SYNC)

 

INPUT2

(H/V SYNC)

 

G

B

R

HD

VD

75Ω Ô2k.Ω2

When using INPUT2, set the impedance selector switch to match the output impedance of the connected computer’s synchronization signal.

When the output impedance of the computer’s synchronization signal is above 75 Ω, set this switch to the 2.2 kΩ position.

On-screen setup is necessary after connection. Please see pages 14 and 15.

9

English

Installation and Connections

En

Page 8 Page 10
Image 9
Page 8 Page 10
Contents PDA-5002 Before Proceeding ContentsLabel for remote control unit BNC/Pin conversion adaptor Checking Supplied AccessoriesPress 5/∞/2/3 to adjust the value Press Menu to display the menu screenConnection Panel Part Names and FunctionsPlasma Display Section Do not Make ANY Connections to this Terminal= AC Inlet Video Card PDA-5002 SectionInstallation and Connections Installing the Video CardInstallation Connection to INPUT1 and INPUT2 Input Connectors on the Plasma Display with Video CardConnection to AV components Connection to AV component that has Component video jacksConnection of G on Sync analog RGB source Connection to a personal computer Connection of composite Sync analog RGB SourceConnection of separate Sync analog RGB Source When connecting to Output INPUT1 Connections When connecting to INPUT1Connection to INPUT3 Connection to INPUT4About DTV Set Top Box Connection Connection to INPUT5Audio connection for component connected to Audio ConnectionsINPUT3 INPUT4Organize cables together using the provided speed clamps How to Route CablesTo attach the speed clamps to the display To remove speed clampsSetup after Connection Setting Up the SystemSetting the Screen Mode / Input Signal Format Video SignalSetup of Clamp Position Clamp Position setupPress 5/∞ to select Clamp Position Press SET to select LockedSelecting an Input Source OperationsBefore you begin, make sure you have OperationsPress Volume on the remote control unit To adjust the volumePress Muting on the remote control unit Press Display on the remote control unitScreen Size Selection During video signal inputChanging the screen size Automatic screen sizePoint Zoom Partial Image EnlargementAutomatic Power OFF To return to operating modePower OFF Display Panel Adjustments Adjusting the Picture QualityTo reset Picture mode settings to the default Press 2/3 to select Screen Display Panel AdjustmentsTo reset Screen mode settings to the default Press 2/3 to carry out the adjustmentPress 2/3 to select YES, and press SET Other Operations Rewriting the Input DisplayInput Label Color Temp Changing the Color TemperatureSetting the Regional TV System Format Setting the PureCinema modePress 5/∞ to select Purecinema Press 5/∞ to select Color SystemPress SET repeatedly until the appropriate setting appears Viewing a Fast Moving Picture 3D Y/C ModePress 5/∞ to select 3D Y/C Mode Press SET to set the mode to MotionViewing in a Bright Location Press SET to set the mode to onHigh Contrast Press 5/∞ to select High ContrastAuto Function Press MenuPress 2/3 to select Option Audio Output Audio OUT Accessories SpecificationsAdditional Information GeneralVideo signal compatibilty table INPUT1, INPUT2 PC signal compatibilty table INPUT5 Additional InformationSupplement Explanation of Terms

PDA-5002 specifications

The Pioneer PDA-5002 is a hallmark of modern audio technology, designed for enthusiasts who seek high-quality sound and versatile performance in their vehicles. This advanced digital amplifier integrates innovation and functionality to enhance the driving experience, making it a popular choice among car audio aficionados.

At the heart of the PDA-5002 is its powerful Class D amplifier architecture. This technology not only provides high efficiency, reducing the load on your vehicle’s electrical system, but it also ensures minimal heat generation, allowing for continuous use without the risk of overheating. With a maximum output power of 500 watts, the PDA-5002 delivers an impressive audio performance, capable of driving multiple speakers while maintaining clarity and dynamic range.

One of the key features of the PDA-5002 is its multi-channel configuration. It includes four channels, allowing users to connect a wide range of speaker setups, from simple front and rear speakers to more complex multi-speaker arrangements. This versatility makes the amplifier ideal for both casual listeners and serious audiophiles who demand high fidelity.

The unit supports a variety of audio signal inputs, including RCA and speaker-level inputs, ensuring compatibility with numerous head units and aftermarket systems. This flexibility is essential for users looking to upgrade their audio without overhauling their entire system.

Pioneer has also incorporated advanced signal processing technologies into the PDA-5002. Features such as adjustable crossover settings allow users to tailor the amplifier’s output to match their specific speakers and personal preferences. Bass boost and high-pass filter settings further enhance the audio experience, enabling users to achieve the perfect sound profile.

Durability is another hallmark of the PDA-5002. Built with robust components and a compact, heat-resistant chassis, it is designed to withstand the rigors of automotive environments, ensuring longevity and reliable performance. Its sleek design allows for easy installation in tight spaces, making it a practical choice for various vehicle models.

In summary, the Pioneer PDA-5002 stands out with its powerful Class D amplification, multi-channel capability, versatile input options, advanced signal processing features, and durable construction. It represents a perfect fusion of innovation and performance, catering to those who seek an enhanced listening experience on the road. For anyone looking to elevate their car audio system, the PDA-5002 is certainly worth considering.
Top Page Image Contents