Planar CT1905S manual Connecting Video, Connecting the Stereo Speakers, Chapter

Page 10

Chapter 1

Connecting Video

1.Before connecting your monitor to the PC, please power-off both devices.

2.Connect one end of the VGA signal cable to the PC’s 15-pin VGA port and the other end to the monitor 15- pin VGA port.

3.Connect one end of the DVI signal cable to the PC’s 24-pin DVI port and the other end to the monitor 24-pin DVI port.

4.Make sure the signal cables are securely connected to both the monitor and PC. Tighten the connecting screws to ensure a secure connection.

If both analog (15-pin D-sub VGA) and digital (24-pin DVI) input ports are connected at the same time, the signal input can be selected with the port select button. Please go to the next chapter for details.

Connecting the Stereo Speakers

1.Connect the 1.5M audio cable to the Line-OUT of your PC’s audio card.

2.Connect the opposite end of the 1.5M audio cable to the LCD Monitor’s line-IN connector.

Image 10

Contents Page Page FCC Compliance Statement Planar User’s ManualPREFACE Radio Frequency Interference StatementPreface PREFACE TABLE OF CONTENTSTABLE OF CONTENTS CHAPTERPage Your new LCD Monitor The LCD MonitorUnpacking The LCD Monitor - Front View Identifying ComponentsChapter The LCD Monitor - Rear View1. Input signal ports Adjusting the Viewing AngleConnecting AC Power 2. AC Power JackConnecting Video Connecting the Stereo SpeakersConnecting the Optional Touch Screen Power Management SystemThe LCD Monitor’s Display Controls Adjusting the DisplayThe Display Controls OSD Main MenuGeometric Menu OSD Adjust OptionThe Display Menu Speaker Volume Use theOSD-H-Position Use the Color Adjust Option1. When there is no input signal OSD-V-Position Use the2. Audio Volume Hotkey The hotkey descriptions1. Main Menu pop up /Auto-Adjust Hotkey 3. Contrast Adjust HotkeyAPPENDIX A TFT LCD Monitor SpecificationsTechnical Information ModelSupported Timing Timing for Model CT1905U UXGA ResolutionAPPENDIX B Troubleshooting Troubleshooting Procedures