D. Component Media Source
•Video – Connect the Component Video output (YPbPr) from the source, into to the Component Adapter (included). Connect the Component Adapter to the
•Audio - Connect a
Step 2
Setting Up Media Component IR Remote Control Capabilities
IR Flasher Eye
A. Connect the provided IR Flasher to the
B. Find the location of the IR widow on your component and adhere the IR Flasher Eye directly over the IR window of your component.
Note: One IR Flasher eye is to be used for one component device.
Tips
Most often the IR window on the source device is easier to locate with direct light shining on sections of the front panel of the device (a small flashlight or a camera phone flashlight works well).
20 of 36 | ISSUED: |