Peerless Industries HDS200 user manual How to Check Firmware Version

Page 31

How to Check Firmware Version

Step 1

Connect the Receiver that needs its firmware to be checked to the display device (reference the installation section of this manual).

Step 2

Plug in the power AC adapter into a power outlet, and then connect the power cord to the HD Flow Pro Wireless Multimedia Kit and turn on the display device.

Step 3

The start-up process of the HD Flow Pro Wireless Multimedia Kit takes about 1.5 to 2 minutes to complete. The Power/Link Indicator Light on the Transmitter and the Receiver should be flashing at first. Flashing indicates that that the units are establishing a secure connection. Wait until the connection is successfully established, indicated by the Power/Link Indicator Light becoming a solid light.

Step 4

At this time the HD Flow logo should appear on your display device.

Note: If the logo does not appear, check to ensure that the proper input is selected on the Receiver and the display device.

Step 5

•Using the provided remote control, point the remote control directly into the IR window of the Receiver that is being checked for firmware version and press the “INFO” button. The below information should show up on the display device.

•Reference the example below on how to find the firmware version for the Transmitter and Receiver.

Transmitter Designation

Firmware Version

Receiver Designation

Firmware Version

31 of 36

ISSUED: 07-24-12 SHEET #: 180-9023-1

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Pro Wireless Multimedia Kit Page Contents Proper Care and Safety Safety PrecautionsUnit Care Recommendations Package Contents FeaturesIntroduction USB Product SpecificationsAudio Format Supported Wireless ConnectionWiFi Channel Frequencies Video Format SupportedTransmitter Front TransmitterIR Window Transmitter Front Power/Link Indicator LightPower/Source Selection Button HdmiTransmitter Back PC-IN VGA Transmitter Back Hdmi 1Hdmi 2 AV-INReceiver Front ReceiverHdmi Receiver Front Power/LinkReceiver Back USB IR-INRemote Control Issued 07-24-12 Sheet # Step Installing the Remote Control BatteryComposite Media Source Installation and OperationVGA Media Source Tips Component Media SourceComposite Output to Display Step Powering-up the HD Flow Multimedia KitComponent Output to Display Step Selecting Input and Output Port Peer-to-Peer and Multicast LAN wired Mode InstallationPeer-to-Peer Direct LAN Connection Configuring for LAN Through Router LAN One-to-One LAN Connection Through Router LAN One-to-OneTransmitter/Receiver Indicator Lights DecodedPeer-To-Peer Modes IR FlasherIR Extender Product ModesMulticast LAN wired Mode Advanced Settings Multicast Wireless ModeMulticast Modes What do I use the VGA Adapter for? FAQsWhat is the USB port used for? Firmware Upgrade Factory ResetAppendix How to Check Firmware Version Comp Avcvbs Supported Video FormatsCE Compliance FCC ComplianceYear Limited Warranty WarrantyCustomer Care Contact Information
Top Page Image Contents