1_SMO-210TP_ENG 5/30/03 2:56 PM Page e-24

2) When Channel Loss is detected

e-24

If the channel loss detection function detects a channel loss, the word "EVENT" is displayed on the screen and a warning buzzer sounds. When this occurs, press ENTER

and up to 15 frames before and after the detected channel loss are replayed on the Event

Replay window.

Press ENTER again to stop the event replay. If channel loss is detected on more than one channel, press ENTER to start event replay for the next channel when the current event replay finishes. When the event replay for all the channels on which channel loss has been detected finishes, press ENTER to exit the Event Replay mode.

Channel loss histories are recorded in the EVENT LIST.

11. When you want to watch a Door Bell screen

You can use the Door Bell screen only when a Door Bell Box is connected.

If the doorbell is pressed, a warning sound is generated and the screen mode changes to LIVE mode, which displays 9 channels at the same time. The letter "D" is displayed on the screen of the channel on which the doorbell has been pressed and a still screen is saved in the Door Bell List. Up to 16 frames can be saved in the Door Bell List. You can select a frame and view it on the screen.

Move to your desired item by going to "6. DOOR BELL LIST" on the SETUP menu and press ENTER to display it as a still screen.

Then, press ENTER again to return to the "DOOR BELL LIST" screen.