Samsung SMO-210TP manual Hidden Camera, Sequence, System ID

1_SMO-210TP_ENG 5/30/03 2:56 PM Page e-38

e-38

HIDDEN CAMERA

•Select “HIDDEN CAMERA…” using the Rotary Wheel and press ENTER to display the following screen.

[HIDDEN CAMERA]
CH	LIVE	P.B.
CH1	OFF	OFF
CH2	OFF	OFF
CH3	ON	OFF
CH4	OFF	OFF
CH5	OFF	OFF
CH6	OFF	OFF
CH7	OFF	OFF
CH8	OFF	OFF

•Turn the Hidden Camera On/OFF of in LIVE Mode and P.B. MODE for each channel.

•Press the MENU button after completing the settings to return to the SYSTEM SETTING Menu.

SEQUENCE

•Set the Switching Interval for Sequence Mode. You can set the time between 1 sec and 30 sec.

SYSTEM ID

•This function allows the user to control a single monitor using the remote control when multiple (up to 10) monitors are linked together. Only those monitors with IDs matching the Remote Control ID will be controlled by the remote control.

CH1		CH2	CH3
	MONITOR ID: 1 REMOCON ID: 2
CH4		CH5	CH6
CH7		CH8

•Setting: The default value of the monitor and the remote control is “1”. The value of the Monitor ID can be set from 0 to 9 by accessing the SYSTEM ID Setup mode under the SYSTEM SETTING menu. Press the SYSTEM ID button on the remote control to display the Monitor ID and the Remote Control ID as shown above. With system ID button pressed, enter the desired number by pressing the corresponding button (0 to 9) to set up the Remote Control ID. The OSD will disappear three seconds after the last button is pressed.