1_SMO-210TP_ENG 5/30/03 2:56 PM Page e-44

2. Motion Occurrence

The Motion option only becomes available when a camera with Motion features is connected.

1) When a Motion trigger is received, a warning buzzer sounds and the screen is divided

e-44

into 9 Live-Mode sub-screens. The word “EVENT ”appears on the screen and the Motion occurrence information is displayed at the bottom right of the screen.

02/06/01 12:30:01

EVENT

CH1 CH2 CH3

CH4 CH5 CH6

CH7

CH8

M 12345678

2)Press ENTER (in the middle of the Rotary Wheel) to replay the event in Event Replay mode. Up to 15 screens can be replayed centering on the time of the Motion occurrence. The duration of the replay is displayed in a graph.

Turn the Rotary Wheel during the Replay to forward or reverse the stored screens one by one.

Press ENTER to terminate the Event Replay. The Event Replay will continue until ENTER has been pressed.

 

02/06/01

12:30:01

 

1

 

EVENT

 

CH2

CH3

 

 

CH4

 

CH5

CH6

 

 

 

MOTION

 

 

 

02/06/01

CH7

 

CH8

12:29:30

3)Motion occurrence information is stored in the “EVENT LIST”.

4)Alarm Out (HOT, COLD) signals are active during “ALARM HOLD TIME”.

5)Recording output continues in Normal mode until the Motion is cleared. The recording frequency of the corresponding channel increases.

6)Signal output continues as the Motion occurs and later clears.