GB
*These states have certain parts where a different time zone is followed. Check to make sure to set the correct time zone for your area.
**These states have certain areas where Daylight Savings are not observed. In Hawaii, the whole state does not follow Daylight Savings.
SETTING THE TIME AND LANGUAGE DISPLAYS
Your clock is designed to automatically set itself using the radio signal from the U.S. Atomic Clock. However, should you need to manually set the clock without using the radio signal, follow the instructions below. You can also choose your language for the weekday display here.
Press 
or 
to adjust the values for each setting. To return NOTE to normal clock mode, press the ALARM button anytime
during the procedures below.
NOTE We recommended that you disable the RF signal before manually setting the clock (→ p.15).
18
GB
1. Press and hold MODE for 2 seconds.
Press MEMORY
2. Adjust the GMT difference according to your timezone.
Press MEMORY
3. Choose between
Press MEMORY
4. Adjust the current hour.
Press MEMORY
5. Adjust the current minute.
Press MEMORY
6. Adjust the current year.
Press MEMORY
7. Adjust the current month.
Press MEMORY
8. Adjust the current date.
Press MEMORY
9. Choose the language for the day of the week displayed.
Press MEMORY
10. Return to normal clock operation.
19
EMR898_GB(02/05) | Page | 12/1/03, 10:36 AM Adobe PageMaker 6.5C/PPC |