GB
GENERAL WARNINGS
¥Do not attempt to repair the product yourself. Contact the retailer or our customer service department if it requires servicing.
¥Take precautions when handling all battery types. They can cause injuries, burns, or property damage as a result of contact with conducting materials, heat, corrosive materials or explosives.
¥Remove the batteries before storing the product for long periods of time.
¥The product is a precision instrument. Never attempt to take this device apart. There is a serious danger of powerful electric shocks.
¥Do not immerse the device in water.
¥Do not, under any circumstances, touch the exposed electronic circuitry of the device as there is a danger of electric shock should it become exposed.
¥Take special care when handling a damaged LCD display, as the liquid crystals can be harmful to your health.
¥Do not use or store the device, including the remote sensor, in locations that may adversely affect the product such as rain, snow, desert, and magnetic fields.
¥Do not use this device in aircrafts or hospitals. This can cause malfunctions in the control devices of other equipment.
¥Check all major functions when the device is unused for a long period of time. This is to ensure its full operation. Maintain a regular internal testing and cleaning of your device.
Cleaning your Device
Cleaning
LCD Screen | Clean with a soft, dry cloth. |
|
|
Body | Clean with a damp cloth; dry immediately. |
|
|
¥Do not use benzene, thinner, or similar cleaning agents to clean your device, as these may cause permanent damage not covered by the warranty.
¥Do not scratch hard objects against the LCD screen as it is easily damaged.
2
GB
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
¥Reorient or relocate the receiving antenna.
¥Increase the separation between the equipment and receiver.
¥Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
¥Consult the dealer of an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Oregon Scientific for compliance could void the warranty and your authority to use this equipment.
DECLARATION OF CONFORMITY
The following declaration is required for us to fully meet the FCC requirements. The information below is not to be used as contact for support or sales. Please call our customer service number, listed on our website at www.oregonscientific.com, or on the warranty card for this product) for all inquiries instead.
We |
|
Name: | Oregon Scientific, Inc. |
Address: | 19861 SW 95th Place, Tualatin, Oregon 97062 USA |
declare that the product | |
Product No.: | EMR898A |
Manufacturer: | IDT Technology Limited |
Address: | Block C, 9/F, Kaiser Estate, Phase 1, |
| 41 Man Yue St., Hung Hom, Kowloon, Hong Kong |
is in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1)This device may not cause harmful interference.
2)This device must accept any interference received, including interference that may cause undesired operation.
3
EMR898_GB(02/05) | Page | 12/1/03, 10:36 AM Adobe PageMaker 6.5C/PPC |