Clock Functions

Resetting Maximum / Minimum Temperatures

To clear the maximum and minimum recorded temperatures:

Radio Reception Description

Strong reception of the U.S. Atomic Clock signal.

Press MEMORY

1.Press and hold MEMORY for 2 seconds. The maximum and minimum temperatures for both indoor and remote readings will be erased.

2.The maximum and minimum temperatures will have the same values as the current temperature until different readings are recorded.

NOTE

Weak reception of the U.S. Atomic Clock signal.

No reception of the U.S. Atomic Clock signal.

Receiving the U.S. Atomic Clock signal.

Radio Reception is disabled.

Reception can be affected by a number of factors. For best reception, place the device away from metal objects and electrical appliances. Other causes for signal interference

include electrical transmission towers, steel reinforced construction, and metal siding. Reception is ideal when placed near a window.

Even though there are areas that may have more difficulty in

Your product is designed to synchronize its calendar clock automatically once it is brought within range of the radio signal from the U.S. Atomic Clock. When the main unit is new and just out of the

NOTE

receiving a signal, the Atomic Clock contains accurate quartz movement and will retain precise timing even if the signal is occasionally missed.

box, synchronization with the U.S. Atomic Clock can take up to 72 hours. When the unit is receiving the signal, the Radio Reception symbol with start to blink. Generally, complete reception takes around 2 to 10 minutes, depending on the strength of the radio signal. The clock automatically searches for radio signal at 1AM, 2AM, 3AM, 9AM, 3PM and 7PM daily.

ENABLING / DISABLING RADIO RECEPTION

To manually disable the reception of the Radio Frequency (RF) signal, press and hold (→ p.4,C.) for 2 seconds until the Radio Reception symbol completely disappears.

To enable the reception again, press and hold (→ p.4,C.) for 2 seconds. The Radio Reception symbol will blink and the unit will search for the RF signal automatically.

EMR898_GB(02/05)

Page 16-17

12/1/03, 10:36 AM Adobe PageMaker 6.5C/PPC