GB
For best reception, place the unit away from other equipment that emit radio frequency or microwave signals such as TVs, radios, PCs or microwave ovens. Other causes for signal interference include electrical power transmission tower and/or steel reinforced concrete construction.
3. Clock with Weekday
-
Clock (2nd
HOW TO ENABLE OR DISABLE AUTO-
RECEPTION
To disable the automatic reception of radio signal, press and hold [VOL
To activate the signal reception again, press and hold [VOL +] for 2 seconds. The reception icon will appear again and start blinking to indicate auto reception of radio signal.
DISPLAY MODES SELECTION
Press [MODE] in the normal display mode to scroll through the calendar clock display modes:
1. Clock with Second
Calendar/Indoor Temperature
2. Clock with Weekday
Calendar/Indoor Temperature
4. Clock with Weekday(2nd
Calendar (2nd
SETTING THE CLOCK AND
CALENDAR MANUALLY
When the automatic radio reception is disabled, the main unit can be set manually. Set the Clock and Calendar by following the procedures below:
1.Press and hold [MODE] for 2 seconds. The 2nd
2.Enter the
3.Follow the same procedures to set the
4.Press [MODE] to save the changes and exit the setting mode. If changes are made after the minute adjustment, the value of seconds will be reset and start from zero.
5.For the
6
RRM968PM_EN_R0 | 6 | 7/7/04, 11:01 AM |