Optoma Technology 1080p DLP manual Unstable or flickering image, Image has vertical flickering bar

2. Press the toggle output settings. Example: [Fn]+[F4]

1. First, follow the steps above to adjust resolution of the comput- er.

Appendices

6. Select the “Change” button under the “Monitor” tab.

7. Click on “Show all devices.” Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box.

8. Verify that the resolution setting of the monitor display is lower than or equal to UXGA (1600 x 1200). (*)

Note

(*) The resolution:

HDMI’s 1920 x 1080 i/p If you are using a Notebook: and component’s 1920 x

1080 i is recommended for this projector.

English

Compaq=>	[Fn]+[F4]	Hewlett
Dell =>	[Fn]+[F8]	Packard =>	[Fn]+[F4]
Gateway=>	[Fn]+[F4]	NEC=>	[Fn]+[F3]
IBM=>	[Fn]+[F7]	Toshiba =>	[Fn]+[F5]

Mac Apple:

System Preference-->Display-->Arrangement-->Mirror display

If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector.

The screen of the Notebook or PowerBook computer is not displaying your presentation

If you are using a Notebook PC:

Some Notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reac- tivated. Refer to your computer’s manual for detailed information.

Unstable or flickering image

Use “Tracking” to correct it. See page 30 for more information.

Change the monitor color setting on your computer.

Image has vertical flickering bar

Usetion.“Phase” to make an adjustment. See page 30 for more informa-

Check and reconfigure the display mode of your graphic card to make it compatible with the projector.

37