Onkyo TX-SR403 Press the Setup button, Press the remote controller’s Test Tone but

Page 33

First Time Setup—Continued

6

7

8

Use the Down [ ] button to select “Surround,” and then use the Left and Right []/[ ] but- tons to select Small, Large, or None.

Small: Select if the surround speak- ers are small.

Large: Select if the surround speak- ers are large.

None: Select if no surround speakers are connected.

Note:

•If the Front setting in step 4 is set to Small, the Large option cannot be selected.

Use the Down [

] button to

select “Surr Back,” and use the

Left and Right [

]/[ ] buttons to

select Small, Large, or None.

Small: Select if the surround back speaker is small.

Large: Select if the surround back speaker is large.

None: Select if no surround back speaker is connected.

Notes:

•If the Surround setting in step 6 is set to None, this setting does not appear.

•If the Surround setting in step 6 is set to Small, the Large option cannot be selected.

Press the [SETUP] button.

Setup closes.

TESTING THE SPEAKERS

To test that all of the speakers are working properly,

press the remote controller’s [TEST TONE] but-

ton. The test tone will be output by each speaker in turn and the name of each speaker will appear on the display. To turn off the test tone, press the [TEST TONE] button again.

•If the test tone is not produced by a speaker, or it’s produced by a speaker other than that shown on the display, you may have wired the speakers incorrectly and you should check your connec- tions (see page 17).

•If the test tone is not produced by a speaker and its name does not appear on the display, you may have set the speaker settings incorrectly (see page 32).

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents TX-SR403 Avis Important Safety InstructionsPower PrecautionsSpeaker cable labels Supplied AccessoriesTable of Contents FeaturesFront Panel 6 78 9JK Front & Rear PanelsDisplay Front & Rear Panels9 J K Rear PanelBefore Using the AV receiver Installing the BatteriesUsing the Remote Controller Remote Controller How to Use the Remote ControllerReceiver Mode Remote Controller DVD Mode CDR CD, MD, & CDR ModePlay button Tape ModeStop button Reverse Play buttonEnjoying Home Theater Connecting Your SpeakersSpeaker Connection Precautions Connecting Your SpeakersSpeaker Configuration Attaching the Speaker LabelsConnecting a Powered Subwoofer Connecting SpeakerSpeaker Set a Speaker Set BConnecting the Indoor FM Antenna Connecting AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shown American ModelConnecting an Outdoor FM Antenna Connecting AntennaConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterAbout AV Connections Connecting Your ComponentsOptical Digital Jacks AV Connection Color CodingConnecting Both Audio & Video Connecting Your ComponentsWhich Connections Should I Use? Video Connection FormatsVideo Connection Connecting a TV or ProjectorAudio Connection HintConnecting a DVD player Type of connectionTX-SR403/8340 Connecting a VCR or DVD Recorder for Playback VCRDVD recorder Connecting a Camcorder, Games Console, or Other Device Connecting a VCR or DVD Recorder for RecordingVideo 3 Composite video outputOr the other Connect oneCD Player, or Turntable with Built-in Phono Preamp Step Connecting a CD Player or TurntableTurntable MM with built-in phono preamp Phono Preamp MC head amp or MC transformerConnecting a Cassette, CDR, MiniDisc, or DAT Recorder Connecting the Power Cord of Another ComponentCassette recorder, CDR, etc Connecting the Power Cord Connecting Onkyo ComponentsAuto Power On/Standby Direct ChangeTurning On the AV Receiver Turning OnSmooth Operation in a Few Easy Steps Have you connected a component to a digital audio input?First Time Setup Assigning Digital Inputs to Input SourcesChanging the TAPE/MD/CDR Display Lowed by the Setup button First Time SetupPress the Receiver button fol ReturnPress the remote controller’s Test Tone but Press the Setup buttonPlaying Your AV Components Select a suitable listening mode and enjoyBasic AV Receiver Operation Start playback on the source componentUsing the Multichannel Input Playing Your AV ComponentsDisplaying Source Information Tuning into Radio Stations Using the TunerAM Frequency Step Setup Listening to the RadioPresetting Radio Stations Deleting Presets Using the TunerSelecting Preset Stations Displaying Radio InformationSetting the Display Brightness Adjusting the Bass & TrebleCommon Functions Muting the AV ReceiverUsing Headphones Using the Sleep TimerAdjusting Speaker Levels Common FunctionsSelecting with the Remote Controller Using the Listening ModesSelecting Listening Modes Selecting on the AV receiverPCM*1 Using the Listening ModesDTS About the Listening ModesOnkyo Original DSP Modes Using the Late Night Function Dolby Digital only Adjusting the Listening ModesUsing the CinemaFILTER Using the Audio Adjust FunctionsInput Channel Settings Adjusting the Listening ModesPL II & PL IIx Music Mode Settings DTS Neo6 Music Mode SettingRecording Recording the Input SourceRecording from Different AV Sources Advanced Speaker Settings Advanced SetupCrossover Frequency Double BassAdvanced Setup Speaker DistanceSpeaker Levels Digital Input Signal Formats Troubleshooting Troubleshooting Sound changes when I connect my head- phones? Remote controller doesn’t work?Can’t control other components? Can’t record?Amplifier Section SpecificationVideo Section Tuner SectionMemo Memo Onkyo Europe Electronics GmbH Onkyo U.S.A. CorporationOnkyo Europe UK Office Onkyo China Limited

TX-SR403 specifications

The Onkyo TX-SR403 is a versatile and feature-rich audio receiver that caters to both home theater enthusiasts and casual listeners alike. Introduced as part of Onkyo's lineup, this model aims to deliver high-quality sound reproduction, making it an excellent choice for anyone looking to enhance their audio experience.

One of the standout features of the TX-SR403 is its multi-channel audio capabilities. This receiver supports up to 6.1 channels, allowing for an immersive surround sound experience that draws listeners into their favorite movies, music, and video games. The power output is rated at 100 watts per channel, which is more than sufficient to fill a medium-sized room with dynamic and clear sound. It supports various audio formats, including Dolby Digital and DTS, ensuring compatibility with a wide range of media.

The TX-SR403 also excels in connectivity options. It is equipped with multiple HDMI inputs, along with component and composite video inputs, making it easy to connect to various devices such as Blu-ray players, gaming consoles, and streaming devices. This versatility ensures that users can easily integrate their existing home entertainment systems, allowing for seamless audio and video interaction.

In addition to its audio prowess, the TX-SR403 incorporates advanced technologies designed to enhance the listening experience. The receiver features Onkyo's proprietary Wide Range Amplification Technology (WRAT), which increases the dynamic range and improves tonal accuracy across various frequencies. This technology helps eliminate distortion, even at high volume levels, offering a cleaner and more enjoyable listening experience.

The user interface on the TX-SR403 is straightforward, featuring an easy-to-read display and intuitive control options. The remote control is user-friendly, enabling users to switch between different inputs, adjust settings, and create custom sound profiles with ease. The receiver also includes built-in FM/AM tuners for those who enjoy listening to radio broadcasts.

Overall, the Onkyo TX-SR403 stands out as a robust audio receiver that combines quality, functionality, and ease of use. Whether you are looking to set up a comprehensive home theater or simply want to improve your music listening experience, the TX-SR403 is a commendable choice that delivers excellent performance and versatility for all your audio needs.
Top Page Image Contents