Onkyo TX-SR403 instruction manual Advanced Setup, Speaker Distance, Speaker Levels

Page 48

Advanced Setup—Continued

Speaker Distance

To get the best from surround sound, it’s important that the sound from each speaker reaches the listener at the same time. To achieve this, you need to specify the dis- tance from each speaker to the listening position.

1

 

Measure and make a note of the

 

 

 

 

distance from each speaker to

 

 

the listening position.

 

 

 

2

 

Press the [RECEIVER] button fol-

RECEIVER

lowed by the [SETUP] button on

 

 

the remote controller.

3 Use the Up and Down []/[ ] buttons to select “2. Sp Dis- tance,” and then press the [ENTER] button.

4

While “Unit” is displayed, use the

 

 

Left and Right [ ]/[ ] buttons to

 

select “feet” or “meters”.

feet: Distances in feet. Can be set from 1 to 30 feet in 1-foot steps.

meters: Distances in meters. Can be set from 0.3 to 9 meters in 0.3-meter steps.

5

Use the Down [

] button to

 

select “Front,” and use the Left

 

and Right [ ]/[

] buttons to

specify the distance for the “front speakers,” then press the Down [ ] button to select the next speaker.

6

Repeat step 5 for all speakers.

 

 

Note:

 

Speakers that you set to No or None in

 

the Speaker Configuration (page 32)

 

cannot be selected.

 

 

7

Press the [SETUP] button.

 

 

Setup closes.

 

 

Notes:

•The Center and Subwoofer distances can be set up to 5 ft. (1.5 m) more or less than the Front distance. For example, if the Front distance is set to 20 ft. (6 m), the Center and Subwoofer distances can be set between 15 and 25 ft. (4.5 and 7.5 m).

•The Surround and Surround Back distances can be set up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less than the Front distance. For example, if the Front distance is set to 20 ft. (6 m), the SurrRight, Surr Left, Surr Back dis- tances can be set between 5 and 25 ft. (1.5 and 7.5 m).

Speaker Levels

With this function, you can adjust the volume of each speaker so that all speakers can be heard equally at the listening position.

Speaker levels cannot be adjusted while the AV receiver is muted.

1

 

Press the [RECEIVER] button fol-

RECEIVER

lowed by the [SETUP] button on

 

 

the remote controller.

2

Use the Up and Down [ ]/[ ]

 

buttons to select “3. Level Cal,”

and then press the [ENTER] but- ton.

A pink noise test tone is output by the front left speaker.

3

Turn up the volume so that you

 

 

can hear the test tone suffi-

 

ciently.

 

While each speaker outputs the test

 

tone, its name appears on the display, as

 

shown.

 

 

 

 

 

 

 

 

 

 

 

 

48

Page 47 Page 49
Image 48
Page 47 Page 49
Contents TX-SR403 Important Safety Instructions AvisPrecautions PowerSupplied Accessories Speaker cable labelsFeatures Table of ContentsFront & Rear Panels Front Panel 6 78 9JKFront & Rear Panels DisplayRear Panel 9 J KBefore Using the AV receiver Installing the BatteriesUsing the Remote Controller Remote Controller How to Use the Remote ControllerReceiver Mode Remote Controller DVD Mode CD, MD, & CDR Mode CDRTape Mode Play buttonStop button Reverse Play buttonConnecting Your Speakers Enjoying Home TheaterConnecting Your Speakers Speaker Connection PrecautionsSpeaker Configuration Attaching the Speaker LabelsConnecting Speaker Connecting a Powered SubwooferSpeaker Set a Speaker Set BConnecting Antenna Connecting the Indoor FM AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shown American ModelConnecting Antenna Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterConnecting Your Components About AV ConnectionsOptical Digital Jacks AV Connection Color CodingConnecting Your Components Connecting Both Audio & VideoWhich Connections Should I Use? Video Connection FormatsConnecting a TV or Projector Video ConnectionAudio Connection HintConnecting a DVD player Type of connectionTX-SR403/8340 Connecting a VCR or DVD Recorder for Playback VCRDVD recorder Connecting a VCR or DVD Recorder for Recording Connecting a Camcorder, Games Console, or Other DeviceVideo 3 Composite video outputConnect one Or the otherConnecting a CD Player or Turntable CD Player, or Turntable with Built-in Phono Preamp StepTurntable MM with built-in phono preamp Phono Preamp MC head amp or MC transformerConnecting a Cassette, CDR, MiniDisc, or DAT Recorder Connecting the Power Cord of Another ComponentCassette recorder, CDR, etc Connecting Onkyo Components Connecting the Power CordAuto Power On/Standby Direct ChangeTurning On Turning On the AV ReceiverSmooth Operation in a Few Easy Steps Have you connected a component to a digital audio input?First Time Setup Assigning Digital Inputs to Input SourcesChanging the TAPE/MD/CDR Display First Time Setup Lowed by the Setup buttonPress the Receiver button fol ReturnPress the Setup button Press the remote controller’s Test Tone butSelect a suitable listening mode and enjoy Playing Your AV ComponentsBasic AV Receiver Operation Start playback on the source componentUsing the Multichannel Input Playing Your AV ComponentsDisplaying Source Information Using the Tuner Tuning into Radio StationsAM Frequency Step Setup Listening to the RadioUsing the Tuner Presetting Radio Stations Deleting PresetsSelecting Preset Stations Displaying Radio InformationAdjusting the Bass & Treble Setting the Display BrightnessCommon Functions Muting the AV ReceiverUsing the Sleep Timer Using HeadphonesAdjusting Speaker Levels Common FunctionsUsing the Listening Modes Selecting with the Remote ControllerSelecting Listening Modes Selecting on the AV receiverUsing the Listening Modes PCM*1About the Listening Modes DTSOnkyo Original DSP Modes Adjusting the Listening Modes Using the Late Night Function Dolby Digital onlyUsing the CinemaFILTER Using the Audio Adjust FunctionsAdjusting the Listening Modes Input Channel SettingsPL II & PL IIx Music Mode Settings DTS Neo6 Music Mode SettingRecording Recording the Input SourceRecording from Different AV Sources Advanced Setup Advanced Speaker SettingsCrossover Frequency Double BassAdvanced Setup Speaker DistanceSpeaker Levels Digital Input Signal Formats Troubleshooting Troubleshooting Remote controller doesn’t work? Sound changes when I connect my head- phones?Can’t control other components? Can’t record?Specification Amplifier SectionVideo Section Tuner SectionMemo Memo Onkyo U.S.A. Corporation Onkyo Europe Electronics GmbHOnkyo Europe UK Office Onkyo China Limited

TX-SR403 specifications

The Onkyo TX-SR403 is a versatile and feature-rich audio receiver that caters to both home theater enthusiasts and casual listeners alike. Introduced as part of Onkyo's lineup, this model aims to deliver high-quality sound reproduction, making it an excellent choice for anyone looking to enhance their audio experience.

One of the standout features of the TX-SR403 is its multi-channel audio capabilities. This receiver supports up to 6.1 channels, allowing for an immersive surround sound experience that draws listeners into their favorite movies, music, and video games. The power output is rated at 100 watts per channel, which is more than sufficient to fill a medium-sized room with dynamic and clear sound. It supports various audio formats, including Dolby Digital and DTS, ensuring compatibility with a wide range of media.

The TX-SR403 also excels in connectivity options. It is equipped with multiple HDMI inputs, along with component and composite video inputs, making it easy to connect to various devices such as Blu-ray players, gaming consoles, and streaming devices. This versatility ensures that users can easily integrate their existing home entertainment systems, allowing for seamless audio and video interaction.

In addition to its audio prowess, the TX-SR403 incorporates advanced technologies designed to enhance the listening experience. The receiver features Onkyo's proprietary Wide Range Amplification Technology (WRAT), which increases the dynamic range and improves tonal accuracy across various frequencies. This technology helps eliminate distortion, even at high volume levels, offering a cleaner and more enjoyable listening experience.

The user interface on the TX-SR403 is straightforward, featuring an easy-to-read display and intuitive control options. The remote control is user-friendly, enabling users to switch between different inputs, adjust settings, and create custom sound profiles with ease. The receiver also includes built-in FM/AM tuners for those who enjoy listening to radio broadcasts.

Overall, the Onkyo TX-SR403 stands out as a robust audio receiver that combines quality, functionality, and ease of use. Whether you are looking to set up a comprehensive home theater or simply want to improve your music listening experience, the TX-SR403 is a commendable choice that delivers excellent performance and versatility for all your audio needs.
Top Page Image Contents