Onkyo TX-SR403 Remote controller doesn’t work?, Can’t control other components?, Can’t record?

Page 52

Troubleshooting—Continued

Remote Controller

The remote controller doesn’t work?

•Make sure that the batteries are installed with the cor- rect polarity (page 9).

•Make sure that the remote controller is not too far away from the AV receiver, and that there’s no obstruction between the remote controller and the AV receiver’s remote control sensor (page 9).

•Make sure you’ve selected the correct remote control- ler mode (page 10).

•Make sure you’ve entered the correct remote control code.

Can’t control other components?

•Make sure you’ve selected the correct remote control- ler mode (page 10).

•To control Onkyo cassette tape deck, point the remote controller at the AV receiver.

•To control Onkyo CD player or MD/CD recorder, point the remote controller at that component.

Recording

Can’t record?

•On your recorder, make sure the correct input is selected.

•To prevent signal loops and damage to the AV receiver, input signals are not fed through to outputs with the same name (e.g., TAPE IN to TAPE OUT, or VIDEO 1 IN to VIDEO 1 OUT).

Others

The sound changes when I connect my head- phones?

•When a pair of headphones is connected, the listening mode is set to Stereo, unless it’s already set to Stereo, Mono, or Direct.

How do I change the language of a multiplex source?

•Use the “Multiplex” setting on the “4. Audio Adjust” menu to select Main or Sub (page 45).

The functions don’t work?

•To use , you must make an connection and an analog audio connection (RCA) between the compo- nent and AV receiver, even if they are connected digi- tally (page 29).

The AV receiver contains a microcomputer for signal pro- cessing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this happens, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in again.

Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit’s malfunction. Before you record important data, make sure that the material will be recorded cor- rectly.

To reset the AV receiver to its factory defaults, turn it on and, while holding down the [VIDEO 1/VCR] button, press the [STANDBY/ON] button. “Clear” will appear on the display and the AV receiver will enter Standby mode.

Before disconnecting the power cord from the wall out- let, set the AV receiver to Standby.

52

Page 51 Page 53
Image 52
Page 51 Page 53
Contents TX-SR403 Important Safety Instructions AvisPrecautions PowerSupplied Accessories Speaker cable labelsFeatures Table of ContentsFront & Rear Panels Front Panel 6 78 9JKFront & Rear Panels DisplayRear Panel 9 J KInstalling the Batteries Before Using the AV receiverUsing the Remote Controller How to Use the Remote Controller Remote ControllerReceiver Mode Remote Controller DVD Mode CD, MD, & CDR Mode CDRTape Mode Play buttonStop button Reverse Play buttonConnecting Your Speakers Enjoying Home TheaterConnecting Your Speakers Speaker Connection PrecautionsSpeaker Configuration Attaching the Speaker LabelsConnecting Speaker Connecting a Powered SubwooferSpeaker Set a Speaker Set BConnecting Antenna Connecting the Indoor FM AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shown American ModelConnecting Antenna Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterConnecting Your Components About AV ConnectionsOptical Digital Jacks AV Connection Color CodingConnecting Your Components Connecting Both Audio & VideoWhich Connections Should I Use? Video Connection FormatsConnecting a TV or Projector Video ConnectionAudio Connection HintType of connection Connecting a DVD playerTX-SR403/8340 VCR Connecting a VCR or DVD Recorder for PlaybackDVD recorder Connecting a VCR or DVD Recorder for Recording Connecting a Camcorder, Games Console, or Other DeviceVideo 3 Composite video outputConnect one Or the otherConnecting a CD Player or Turntable CD Player, or Turntable with Built-in Phono Preamp StepTurntable MM with built-in phono preamp Phono Preamp MC head amp or MC transformerConnecting the Power Cord of Another Component Connecting a Cassette, CDR, MiniDisc, or DAT RecorderCassette recorder, CDR, etc Connecting Onkyo Components Connecting the Power CordAuto Power On/Standby Direct ChangeTurning On Turning On the AV ReceiverSmooth Operation in a Few Easy Steps Have you connected a component to a digital audio input?Assigning Digital Inputs to Input Sources First Time SetupChanging the TAPE/MD/CDR Display First Time Setup Lowed by the Setup buttonPress the Receiver button fol ReturnPress the Setup button Press the remote controller’s Test Tone butSelect a suitable listening mode and enjoy Playing Your AV ComponentsBasic AV Receiver Operation Start playback on the source componentPlaying Your AV Components Using the Multichannel InputDisplaying Source Information Using the Tuner Tuning into Radio StationsAM Frequency Step Setup Listening to the RadioUsing the Tuner Presetting Radio Stations Deleting PresetsSelecting Preset Stations Displaying Radio InformationAdjusting the Bass & Treble Setting the Display BrightnessCommon Functions Muting the AV ReceiverUsing the Sleep Timer Using HeadphonesAdjusting Speaker Levels Common FunctionsUsing the Listening Modes Selecting with the Remote ControllerSelecting Listening Modes Selecting on the AV receiverUsing the Listening Modes PCM*1About the Listening Modes DTSOnkyo Original DSP Modes Adjusting the Listening Modes Using the Late Night Function Dolby Digital onlyUsing the CinemaFILTER Using the Audio Adjust FunctionsAdjusting the Listening Modes Input Channel SettingsPL II & PL IIx Music Mode Settings DTS Neo6 Music Mode SettingRecording the Input Source RecordingRecording from Different AV Sources Advanced Setup Advanced Speaker SettingsCrossover Frequency Double BassSpeaker Distance Advanced SetupSpeaker Levels Digital Input Signal Formats Troubleshooting Troubleshooting Remote controller doesn’t work? Sound changes when I connect my head- phones?Can’t control other components? Can’t record?Specification Amplifier SectionVideo Section Tuner SectionMemo Memo Onkyo U.S.A. Corporation Onkyo Europe Electronics GmbHOnkyo Europe UK Office Onkyo China Limited

TX-SR403 specifications

The Onkyo TX-SR403 is a versatile and feature-rich audio receiver that caters to both home theater enthusiasts and casual listeners alike. Introduced as part of Onkyo's lineup, this model aims to deliver high-quality sound reproduction, making it an excellent choice for anyone looking to enhance their audio experience.

One of the standout features of the TX-SR403 is its multi-channel audio capabilities. This receiver supports up to 6.1 channels, allowing for an immersive surround sound experience that draws listeners into their favorite movies, music, and video games. The power output is rated at 100 watts per channel, which is more than sufficient to fill a medium-sized room with dynamic and clear sound. It supports various audio formats, including Dolby Digital and DTS, ensuring compatibility with a wide range of media.

The TX-SR403 also excels in connectivity options. It is equipped with multiple HDMI inputs, along with component and composite video inputs, making it easy to connect to various devices such as Blu-ray players, gaming consoles, and streaming devices. This versatility ensures that users can easily integrate their existing home entertainment systems, allowing for seamless audio and video interaction.

In addition to its audio prowess, the TX-SR403 incorporates advanced technologies designed to enhance the listening experience. The receiver features Onkyo's proprietary Wide Range Amplification Technology (WRAT), which increases the dynamic range and improves tonal accuracy across various frequencies. This technology helps eliminate distortion, even at high volume levels, offering a cleaner and more enjoyable listening experience.

The user interface on the TX-SR403 is straightforward, featuring an easy-to-read display and intuitive control options. The remote control is user-friendly, enabling users to switch between different inputs, adjust settings, and create custom sound profiles with ease. The receiver also includes built-in FM/AM tuners for those who enjoy listening to radio broadcasts.

Overall, the Onkyo TX-SR403 stands out as a robust audio receiver that combines quality, functionality, and ease of use. Whether you are looking to set up a comprehensive home theater or simply want to improve your music listening experience, the TX-SR403 is a commendable choice that delivers excellent performance and versatility for all your audio needs.
Top Page Image Contents