Optoma Technology EP705H Adjusting the Projected Image, Adjusting the Projector Height

Page 14

14

English

Adjusting the Projected Image

uAdjusting the Projector Height

The projector is equipped with an elevator foot for adjusting the projector height.

To raise the projector:

1.Press and hold the elevator button Œ.

2.Raise the projector to the desired display angle , then release the button to lock the elevator foot into position.

To lower the projector:

1.Press and hold the elevator button.

2.Lower down the projector, then release the button to lock the elevator foot into position.

 

Œ

Elevator Button

 

 

Elevator Foot

 

*When you adjust the projector height; please place the projector on a flat surface and avoid falling down of the projector.

*For safety purpose, when you adjust the projector height; please loosen the wheels Œ under the elevator foot and pull the stands out .

Œ

Image 14
Contents Table of Contents Precautions Usage NoticeProduct Features IntroductionPackage Overview Product Overview Main UnitConnection Ports Panel ControlRemote Control Installation Connecting the Projector to Desktop ComputerConnecting the Projector to Portable Computer Connecting the Projector to Other Video Sources If you use the video cableIf you use the s-video cable Power On/Off the Projection Display Powering On the Projection DisplayPowering Off the Projection Display Adjusting the Projected Image Adjusting the Projector HeightImage Size Adjustment User Controls Power / StandbyReset MenuZoom Out Computer mode only VolumeZoom In Computer mode only EnterOn-Screen Display Menus 4Volume 4Tint Video mode only4Color Video mode only 4Tracking4Mute Video mode only4Treble 4Mono / Stereo / Stereo-enhance4Lamp Warning 4Lamp Reset4Reset All 4Exit MenuAppendices Problem No image appears on screenProblem Partial, scrolling or incorrectly displayed image Problem Image is out of focus Problem Image is unstable or flickeringProblem Image has vertical flickering bar Problem The screen is outstretched when displaying 169 DVD Lamp Changing Procedure To replace the lamp module, reverse the previous stepsSpecifications Compatibility Modes