Optoma Technology EP705H specifications Connecting the Projector to Other Video Sources

Page 10

10

English

Connecting the Projector to Other Video Sources

vIf your video player uses a round, one-prong composite video connector, you’ll need the video cable. If your video player uses a round, four-prong s-video connector, you’ll need the s-video cable ( See page 11 for detail information).

Both cables are shipped with the projector.

If you use the video cable:

1.Plug the video cable connector into the “Video out”port on your video player; plug the other end into the “Video”port on your projector.

2.Plug the audio cable white connector into the left “Audio out” port on your video player; plug the cable’s red connector into the right “Audio out” port on the video player; plug the other end into the “Audio in” port on your projector.

3.If you need to use an external speaker (built in amplifier), plug the audio cable white connector into the “Audio in” port on your speaker; plug the cable’s red connector into the red “Audio in” port on the speaker; plug the other end into the “Audio out”

port on the projector.

4.Connect one end of the power cord into the back of projector; connect the other end to an electrical outlet.

VideoOutput AudioOutput

 

Audio In Port

Audio Cable

 

Video Cable

Video Port

Power Cord

 

Audio Cable

Audio Out Port

Image 10
Contents Table of Contents Precautions Usage NoticeProduct Features IntroductionPackage Overview Product Overview Main UnitConnection Ports Panel Control Remote Control Installation Connecting the Projector to Desktop ComputerConnecting the Projector to Portable Computer Connecting the Projector to Other Video Sources If you use the video cableIf you use the s-video cable Power On/Off the Projection Display Powering On the Projection DisplayPowering Off the Projection Display Adjusting the Projected Image Adjusting the Projector HeightImage Size Adjustment User Controls Power / StandbyReset MenuZoom Out Computer mode only VolumeZoom In Computer mode only EnterOn-Screen Display Menus 4Volume 4Tint Video mode only4Color Video mode only 4Tracking4Mute Video mode only4Treble 4Mono / Stereo / Stereo-enhance4Lamp Warning 4Lamp Reset4Reset All 4Exit MenuProblem Partial, scrolling or incorrectly displayed image Problem No image appears on screenAppendices Problem Image has vertical flickering bar Problem Image is unstable or flickeringProblem Image is out of focus Problem The screen is outstretched when displaying 169 DVD Lamp Changing Procedure To replace the lamp module, reverse the previous stepsSpecifications Compatibility Modes