Getting Started
CHOOSING A LOCATION
1.This phone requires a modular phone jack (RJ11C) and a standard 120V AC wall outlet.
2.Plug the AC Adapter directly into outlet.
3.Do not plug other appliances into the same outlet or have outlet controlled by a wall switch.
4.Choose a location that is out of the way of normal activities.
!CAUTION: USE ONLY WITH CLASS 2 (CLASSE 2) POWER SOURCE 9V DC, 400mA.
Always connect the AC Adapter to the phone before you connect it to the AC power.When you finish, disconnect the AC power before you disconnect it from the phone.
INSTALLATION
Connecting Your Telephone
Carefully remove your cordless telephone from its box. If there is any visible damage, do not attempt to operate this equipment. Return it to the place of purchase.
Check to be sure that you have all items that come with your telephone.You should have a
HANDSET, BASE UNIT, BATTERY,AC ADAPTER,TELEPHONE LINE CORD, BELT CLIP AND OWNERS MANUAL.
If at any time you have questions about your telephone please contact our Customer Service Department at:
Bottom view of phone
Table/Desktop Installation
CAUTION: Disconnect the telephone line cord before connecting or disconnecting the battery backup in the wall mount bracket.
1.Plug one end of the supplied modular telephone line cord into the jack marked TEL located on the back of the telephone base as shown in the diagram.
2.Plug the modular telephone line cords other end into a modular phone jack.
3.Insert the supplied AC Adapters plug into the jack marked 9V DC 400mA located on the back of the telephone base.
4.Plug the adapter into a standard 120V AC power (electrical) outlet.
8
