Vizio Complete User Manual for VIZIO Setup and Universal Remote Control

VIZIO VP504 FHDTV10A User Manual

1.5 VIZIO Universal Remote Control

The VIZIO Universal Remote Control is a comprehensive remote that can be used to control up to four different components. The remote button functions are explained on the following pages.

Remote LED – Blinks when the remote operates.

This button starts all programming of the Remote Control.

Press this button to turn the TV on from the Standby mode.

Press it again to return to the Standby mode.

This button selects a programmed DVD player.

This button selects a programmed Audio Receiver/Amp/Home Theatre System.

This button selects a programmed cable TV set-top box or a satellite TV set-top box.

This button has been pre-programmed to select the codes to operate the VIZIO HDTV.

Use these buttons to select a channel or enter a password.

This button allows the user to cycle through the inputs.

This DASH button is for the DTV mode. When selecting a digital channel directly use this button for the separation of main and sub- channels. For example, channel 28-2 would be selected by the button sequence 2 8 DASH 2.

NOTE: This is a programmable remote supporting up to 4 devices (see TV, VCR, CABLE, DVD buttons at the top of the remote). If the remote is not working with your VIZIO TV, press the TV button on the remote to set the functions back to TV.

Version 7/2/2008	12
	www.VIZIO.com