VIZIO VP504 FHDTV10A User Manual
2.7.1 Optical Output of Audio received
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical AUDIO OUT (white area) at the rear of the VP504 HDTV10A.
1.Turn off the power to the PLASMA HDTV and Receiver/Amp.
2.Using an SPDIF cable, connect the cable to the audio input connector on the Receiver/Amp and connect the other end to the OPTICAL OUT (white area) audio connectors at the rear of the PLASMA HDTV.
3.Turn on the power to the PLASMA HDTV and Receiver/Amp.
4.Then press the MENU button on the remote control to open the
5.Press the 
on the remote control to select the Audio Adjust menu.
6.Press the 
on the remote control to select SPEAKERS.
7.Press the 
on the remote control to select OFF so that the sound from the
PLASMA HDTV will now be routed through your Receiver/Amp system.
Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed.
Note:
a)Refer to your Receiver/Amp user manual to select the corresponding audio input.
b)The audio output is not amplified and cannot be connected directly to external speakers.
Version 7/2/2008 | 28 |
| www.VIZIO.com |
