Clarity C600 manual Boost ON/OFF Switch, Pulse/Tone, Flash, Mute, Redial/Pause, Battery Backup

Feature Set-up

E

When an incoming call is received, these lights will flash.The handset visual ringer

will also stay lit while the phone is in use.

BOOST ON/OFF Switch

This switch will disable the reset feature of the BOOST Clarity Power button as follows:

ON —When the Boost ON/OFF switch is set to “ON”, the Boost function will be ON every time a call starts, and will default to ON every time the phone hangs up. During

a call, the BOOST Clarity Power button can toggle the Clarity Power ON or OFF according to the user￿s needs.

OFF —When the Boost ON/OFF switch is set to “OFF”, the Boost function (Clarity Power) will be OFF every time a call starts, and the user will need to press the BOOST Clarity Power button in order to gain the extra level of

amplification. If the phone hangs up, the Clarity Power will reset to OFF. During a call, the BOOST Clarity Power button can toggle the Clarity Power function on or off accord- ing to the user￿s needs.

Pulse/Tone

Slide the switch to the type of telephone service you have; tone for touch-tone service or pulse for rotary dialing. Please check with your local telephone company if uncertain

of the type of service.

CAUTION: VOLUME WILL BE

!LOUD WHEN BOOST SWITCH IS SET TO “ON”.

Flash

The FLASH button is activated to use custom calling services such as Call Waiting or Three Way Calling. Please contact your

local telephone company for information on these services.

Mute

The MUTE button allows the user to conduct a private conversation that you do not want the person on the other end to hear.While

in the mute mode, the MUTE button will illuminate RED and the microphone in the handset is disabled. Pressing the MUTE button again will disengage the MUTE feature.

Redial/Pause

The RD/P button both the last number redial and the pause feature.

Battery Backup

Installing four (4) AA Alkaline batteries into the desk/wall mount bracket attached to the tele- phone base will offer you a limited amount of time to continue operating your telephone in the event of a power failure.

To Install Battery Backup Batteries:

1.Disconnect telephone line cord and remove desk/wall mount bracket from telephone base

2.Disconnect battery backup connector from the telephone base

3.Install four (4) AA Alkaline batteries with negative (-) end of battery touching the spring

4.Connect battery backup connector to ter- minal on bottom of telephone base

5.Install desk/wall mount bracket to telephone base

N G L I S H

15