On-Screen Display Menus

English

How to operate

4The Projector has a multilingual On-Screen Display(OSD) menu that allows you to make image adjustments and change a variety of settings. In computer source, the OSD will be the “Computer OSD”. In video source, the OSD will be the “ Video OSD”. The projector will detect the source automatically.

4To open the OSD menu, press the “menu” button on the Remote Control or Panel Control.

4To select among different menus, press the” Menu” button again. Then use

to select different items and use to adjust your selection. 4To exit the OSD, choose the “Exit Menu” and press the enter button.

4When the OSD is displayed, press the “Freeze/CLR” button to exit the OSD.

Language

4Language

You can display the multilingual OSD menu . Use the “ Up” and “ Down” key to select the

language you prefer. The menus redrew immediately.

Display

4Brightness

Adjusting the brightness of the image.

lPress the left key to darken the image.

lPress the right key to lighten the image.

4Contrast

The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image.

lPress the left key to decrease the contrast.

lPress the right key to increase the contrast

4Keystone Correction

Adjusts image distortion caused by tilting the projector.

4Color Temperature

Adjusts the color temperture. The range is from 6500K to 7700K . The factory default is 7100K . With the higher temperature, the screen looks colder; with the lower temperature, the screen looks warmer.