Installing Projector Mount
Installing PRG projector mount with ceiling installation: Attach vertical mounting plate (E) to PRG projector
4 mount (not included) using two M5 x 16 mm socket pin screws (G), four flat washers (O) and two locknuts (N) as shown in figure 4.1.
Installing PRG projector mount with wall installation: Position PRG projector mount (not included) to the orientation shown in figure 4.2 and attach to horizontal mounting plate (F) using two M5 x 16 mm socket pin screws (G), four flat washers (O) and two locknuts (N).
CEILING INSTALLATION
fig. 4.1
PRGPROJECTOR
MOUNT (NOT
INCLUDED)
ARROW
INDICATES
FRONT OF
MOUNT
E
G 
O
O 
N
WALL INSTALLATION
(EXCEPT FOR EXC MODELS) | F |
fig. 4.2 |
|
PRGPROJECTOR
MOUNT (NOT
INCLUDED)
ARROW
INDICATES
FRONT OF
MOUNT
G 
O
O
N
Installing PRS projector mount with wall installation: Position PRS projector mount (not included) to the orientation shown in figure 4.3 and attach to horizontal mounting plate (F) using two M5 x 16 mm socket pin screws (G), four flat washers (O) and two locknuts (N).
Installing PRS projector mount with ceiling installation: Attach vertical mounting plate (E) to PRS projector mount (not included) using two M5 x 16 mm socket pin screws (G), four flat washers (O) and two locknuts (N) as shown in figure 4.4.
Note: Placing washer (O) and nut (N) combination on inside of PRG or PRS projector mount (not included) first while attaching mounting bracket (E or F) can make installation easier as shown in figure 4.5.
WALL INSTALLATION
(EXCEPT FOR EXC MODELS)
fig. 4.3
PRS PROJECTOR MOUNT (NOT INCLUDED)
HOLE INDICATES
FRONT OF MOUNT
G 
O
F
O
N
CEILING INSTALLATION
fig. 4.4
PRS PROJECTOR MOUNT (NOT INCLUDED)
HOLE INDICATES
FRONT OF MOUNT
G
O 
E
O
N
fig. 4.5
PRS PROJECTOR MOUNT (NOT INCLUDED)
PLACE WASHER (O) AND
NUT (N) COMBINATION
FIRST
N
O
8 of 11 | ISSUED: |
Visit the Peerless Web Site at www.peerlessmounts.com | For customer care call |