Instructions for the Installer
2. INSTALLING THE APPLIANCE
This appliance has fire protection (type Y) and can be installed against walls higher than the work surface.
In compliance with Electromagnetic Compatibility regulations, the electromagnetic induction hob is classified in Group 2 and Class B (EN 55011)
2.1 Electrical connection
Check that the voltage and size of the power supply line are as specified on the nameplate inside the storage compartment. This nameplate must never be removed.
The appliance's power supply line must be fitted with an omnipolar breaking device with contact gap of at least 3 mm, located in an easily accessible position close to the appliance itself.
The appliance has a terminal board on its rear for the electrical connection (see diagram below). To access it, remove the back cover.
38
