Installation
Powering On/Off the Projector
Powering On the Projector
1.Remove the lens cap.n
2.Ensure that the power cord and signal cable are securely connected. The “Power/Standby” button will flash green.
3.Turn on the lamp by pressing “Power/Standby” button on the control panel. And the “Power/Standby” button will turn green.o
The startup screen will display for 30 seconds.
4.Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically.
If the screen displays “No Signal”, please make sure the signal cables are securely connected.
If you connect multiple sources at the same time, use the “Source” button on the remote control or control panel to switch.
2 Power/
Standby
Turn on the projector first and then the signal sources.
1
Lens cap
English ... 10