Optoma Technology EP706 Keystone Keystone Correction, Digital Zoom, Projector ID, Security, Reset

Page 24
Keystone (Keystone Correction)

User Controls

Keystone (Keystone Correction)

Adjusts image distortion caused by tilting projector. (±15 degrees)

Digital Zoom

Press the Digital Zoom to reduce the size of an image.

Press the Projector ID to magnify an image on the projection screen.

Projector ID

Allows RS232 control of an individual projector. Range 01-99.

Security

Security Timer: Can be select the time (month/day/hour) func- tion to set the number of hours the projector can be used. Once the time has elapsed you will be requested to enter your pass- word again.

Change Password

Use number buttons to select your password, and then press “Enter” key to confirm your selection.

1.Scroll down to highlight Change Password, and press “Enter” to input old password.

2.The Password is 4 digits, DEFAULT VALUE is “0000” (first time).

3.Enter new Password (4 digits) and press “Enter”.

4.Enter new Password again to confirm and press “Enter”.

Security

Enable: Choose “Enable” to use security verification when the turning on the projector.

Disable: Choose “Disable“ to be able to switch on the projector without password verification.

Reset

Choose “Yes” to return the display parameters on all menus to the factory default settings.

English 24

Image 24
Contents Table of Contents  EnglishSafety Information Important Safety InstructionUsage Notice EnglishPrecautions English  Don’tEye Safety Warnings Product Features IntroductionPackage Overview DocumentsProduct Overview Main UnitControl Panel 1. Power Indicator LED 2. Temp Indicator LED 3. Lamp Indicator LED4. Keystone Correction 5. Menu On/Off 6. Power/Standby 7. Four Directional Select Keys 8. Re-Sync 9. Source 10. EnterConnection Ports 1. PC Analog signal/SCART RGB/HDTV/Component Video Input Connector2. S-Video Input Connector 3. Composite Video Input Connector 4. RS232 Connector 5. KensingtonTM Lock PortWireless Remote Control 11 EnglishInstallation Connecting the ProjectorPowering On/Off the Projector Powering On the ProjectorLens Cap 13 EnglishPowering off the projector Warning IndicatorAdjusting the Projected Image Adjusting the Projector Image HeightTilt Adjusting Elevator FootAdjusting the Projector Zoom / Focus Adjusting Projection Image SizeScreen DiagonalControl Panel & Remote Control User Controls17 English Remote ControlUser Controls 19 English How to operate settings. The projector will automatically detect the sourceOn Screen Display Menus Menu Tree 21 EnglishLanguage LanguageManagement Menu LocationProjection Source LockReset Keystone Keystone CorrectionDigital Zoom Projector IDReset Lamp Hours Direct Power OnAuto Power Off Sleep TimerImage-I C o m p u t e r M o d e / Video ModeDisplay Mode BrightnessSaturation SharpnessFilm Mode 27 EnglishPhase Image-IIComputer Mode Video Mode FrequencyVer. Shift 29 EnglishInput Signal Display areaColour Setting Colour SettingEnhance Red + RedTroubleshooting Problem No image appears on screenProblem Partial, scrolling or incorrectly displayed image AppendicesProblem Image is unstable or flickering Problem Image has vertical flickering barProblem Image is out of focus Problem The image is stretched when displaying 169 DVD Problem Image is reversedProblem Lamp burns out or makes a popping sound Problem LED lighting messageProblem Message Reminders  Fan failed  Replacing the lamp  Temperature ErrorLamp Replacing Procedure Replacing the lamp35 English Compatibility Modes ResolutionMode ANALOGCeiling Mount Installation  Screw type M2.6  Maximum screw length 10mm Minimum screw length 8mm 37 EnglishFor service or support please contact your local office Optoma Global OfficesCanada Europe