User Controls
Management II
Projection Hours
Displays the projection time.
Lamp Hours
Displays the cumulative lamp operating time.
Reset Lamp Hours
Resets the lamp life hour counter after replacing the lamp.
Lamp Reminding
Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before end of life.
High Altitude
Choose “On” to turn on High Altitude mode. Operates the fans at full speed continuously to allow for proper high altitude cooling of
the projector.
Direct Power On
Choose “On” to turn on Direct Power On mode. Operates the pro- jector will automatically power on without press the “Power” key.
Auto Power Off
Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. Then projector
will automatically power off when the countdown has finished.
Sleep Timer
Sets the countdown timer interval. The timer will begin, with or without a signal input. Then the projector will automatically
power off then the sleep timer countdown has finished.