User Controls
“Frequency”, “Phase”
,“H.Position” and “V.Position” function are only supported under Video mode.
Image-II
(Computer Mode /
Video Mode)
Frequency
“Frequency”changes the display data frequency to match the fre- quency of your computer’s graphic card. If you experience a vertical flickering bar, use this function to make an adjustment.
Phase
“Phase” synchronizes the signal timing of the display with the graphic card. If you experience an unstable or flickering image, use this function to correct it.
H.Position (Horizontal Position)
Press the 
to move the image left.
Press the 
to move the image right.
V.Position (Vertical Position)
Press the 
to move the image down.
Press the 
to move the image up.
Degamma
This allows you to choose a degamma table that has been fine- tuned to bring out the best image quality for the input.
Aspect Ratio
Use this function to choose your desired aspect ratio.
4:3 : The input source will be scaled to fit the projection screen.
16:9 : The input source will be scaled to fit the width of the screen.
LBX: This format is for
Window: When a 4:3 image is bigger than a 16:9 screen, select the “Window” mode to fit the image onto the screen without changing the projection distance.
English 28