InFocus DP9295 manual Computer Input Automatic MULTI-SCAN System, Auto PC Adjustment

Page 23

COMPUTER INPUT

AUTOMATIC MULTI-SCAN SYSTEM

This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to “COMPATIBLE COMPUTER SPECIFICATION” on page 26). When selecting Computer, this projector automatically tunes to incoming signal and projects proper image without any special setting. (Some computers need setting manually.)

Note : Projector may display one of following messages.

Auto

When projector cannot recognize connected signal as PC PC SYSTEM MENU

system provided in this projector, Auto PC Adjustment

 

 

 

function operates to adjust projector and message “Auto”

 

is displayed on SYSTEM Menu icon.

 

When image is not provided properly, manual adjustment

 

is required. (Refer to P24 and 25.)

––––There is no signal input from computer. Make sure connection of computer and a projector is set correctly. (Refer to TROUBLESHOOTING on page 40.)

D-VGA, D-SVGA or D-XGA

When digital computer signal is received on DVI terminal, above message is displayed on PC SYSTEM Menu icon.

PC SYSTEM Menu icon Displays system being selected.

E

SELECT COMPUTER SYSTEM MANUALLY

This projector automatically selects PC system among those provided in this projector and PC system can be also selected manually.

1

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT buttons to move a red frame pointer to PC

 

SYSTEM Menu icon.

2

Press POINT DOWN button to move a red arrow pointer to

 

system that you want to set, and then press SELECT button.

PC SYSTEM MENU

PC SYSTEM Menu icon

Displays system being selected.

Systems on this dialog box can be selected.

Custom Mode (1~5) set in PC

ADJUST Menu. (P24, 25)

PC ADJUSTMENT

AUTO PC ADJUSTMENT

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. Auto PC Adjustment function can be operated as follows.

 

Auto PC Adj.

 

1

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT button to move a red frame pointer to PC

 

ADJUST Menu icon.

2

Press POINT DOWN button to move a red frame pointer to

AUTO PC Adj. icon and then press SELECT button twice.

This Auto PC Adjustment can be also executed by pressing AUTO PC ADJ. button on Remote Control Unit.

Store adjustment parameters.

Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, setting can be done just by selecting Mode in PC SYSTEM Menu (P23). Refer to step 3 of MANUAL PC ADJUSTMENT section (P25).

NOTE

PC ADJUST MENU

PC ADJUST Menu icon

Move a red frame pointer to AUTO PC

Adj. icon and press SELECT button.

Fine sync, Total dots and Picture Position of some computers can not be fully adjusted with this Auto PC Adjustment function. When image is not provided properly through this function, manual adjustments are required. (Refer to page 24, 25.)

Auto PC Adjustment function cannot be operated in Digital Signal input on DVI terminal and “RGB”, “720p (HDTV)”, “1035i (HDTV)” or “1080i (HDTV)” is selected on PC SYSTEM Menu.

23

Image 23
Contents DP9295 To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Component Video Features and DesignComputers Color SystemsName of Each Part of Projector Preparation200 240 V AC SETTING-UP ProjectorConnecting AC Power Cord For U.S.A. and Canada For Continental EuropeRoom Light Preparation Positioning ProjectorMoving Projector Preparation Adjustable FeetBNC Input Jacks Connecting ProjectorUSB Connector Series B Terminals of ProjectorTerminals A Projector Connecting to ComputerConnecting to Video Equipment Laser Pointer Function Operation of Remote ControlBefore Operation Focus Button Volume ButtonWired Remote Jack Zoom ButtonPoint Volume + / Buttons TOP Controls and IndicatorsFlow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Sound Menu Before Operation Menu BARGuide Window Turning OFF Projector Turning on / OFF ProjectorTurning on Projector Basic Operation Adjusting ScreenKeystone Adjustment Sound Adjustment Input Menu Computer InputSelecting Input Source Selecting Computer SystemAuto PC AdjustmentAuto PC Adjustment Computer Input Automatic MULTI-SCAN SystemComputer Input Manual PC Adjustment Full screen Computer InputDisplay area Display area H1024 x 48.363 60.004 Computer Input Compatible Computer SpecificationsResolution 640 x 31.469 59.940Image 1~4 Picture Image AdjustmentsImage Level Select Direct Image Level Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentSource Select Menu Video Video InputVideo Pb/Cb,Pr/CrPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N Component Video Signal FormatSelecting Video System Video InputImage button Standard Cinema CinemaVideo Input Image Level Adjustment Closes Image Menu Reset Reset all adjustment to previous figure QuitSetting Menu SettingSetting Menu To change code of Projector To change code of Remote Control UnitWireless Mouse mode Projector modeOperating Wireless Mouse SETTING/APPENDIXOperating Wireless Mouse InstallationCleaning Projection Lens MaintenanceAIR Filter Care and Cleaning Lamp Replace Counter Appendix Lamp ReplacementTroubleshooting Function does not Remote Control UnitWireless Mouse Does not workTechnical Specifications USB Connector Series B Appendix Configurations of TerminalsWarranty Limitation and Exclusion Limitation of Liability 11/2002 610 304 0028 1AA6P1P3747-- MK3F

DP9295 specifications

The InFocus DP9295 is a state-of-the-art digital projector designed for a wide range of applications, including corporate presentations, educational environments, and large-scale events. This projector stands out due to its impressive combination of advanced features, robust technology, and user-friendly characteristics.

One of the main highlights of the DP9295 is its high-resolution capability. Boasting a native resolution of 1920x1080 pixels, it delivers stunningly clear images with rich detail and vibrant colors. This level of clarity is essential for presentations that include intricate graphics or high-definition videos, ensuring that every element is visible even in large venues.

The DP9295 employs advanced DLP (Digital Light Processing) technology, which enhances image quality through improved color accuracy and consistency. DLP is known for its reliability and longevity, making the InFocus DP9295 a dependable choice for long-term use. Furthermore, the projector features a brightness rating of 5000 ANSI lumens, allowing it to perform well even in well-lit environments. This high brightness ensures that images remain sharp and legible, providing a captivating viewing experience.

In addition to its impressive imaging capabilities, the InFocus DP9295 offers a versatile range of connectivity options. It includes HDMI, VGA, and USB ports, facilitating seamless connections to various devices such as laptops, desktops, and media players. This flexibility is crucial in today’s diverse tech landscape, where users often require compatibility with multiple devices.

Another noteworthy characteristic is the projector's robust sound system. Equipped with built-in speakers, the DP9295 delivers impressive audio quality that complements its high-definition visuals. This is particularly advantageous for presentations and multimedia displays, reducing the need for additional sound equipment.

The InFocus DP9295 also prioritizes user convenience, featuring a simple setup process and an intuitive interface. With options for remote control and easy navigation through menus, users can quickly adjust settings to achieve the desired output.

Additionally, energy efficiency is a critical concern in newer projector models. The DP9295 features eco-friendly modes that reduce power consumption without compromising performance, making it a sustainable choice for organizations.

In summary, the InFocus DP9295 is a powerful digital projector that combines high resolution, excellent brightness, versatile connectivity, and user-friendly features. Its advanced DLP technology and built-in sound system make it an ideal solution for anyone looking to make a lasting impression in their presentations or displays. Whether in a classroom, boardroom, or auditorium, the DP9295 is designed to meet diverse projection needs effectively.