InFocus DP9295 manual Computer Input Manual PC Adjustment

Page 24

COMPUTER INPUT

MANUAL PC ADJUSTMENT

This projector can automatically tune to display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from standard ones and may not be tuned by Multi-Scan system of this projector. If this happens, projector cannot reproduce a proper image and image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture.

This projector has a Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special signal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to recall setting for a specific computer whenever you use it.

Note : This PC ADJUST Menu cannot be operated when in digital signal input on DVI terminal and “RGB” is selected on PC SYSTEM MENU (P23).

E

1

Press MENU button and ON-SCREEN MENU will appear. Press

PC ADJUST MENU

POINT LEFT/RIGHT button to move a red frame pointer to PC

 

ADJUST Menu icon.

2

Press POINT DOWN button to move a red frame pointer to item

that you want to adjust and then press SELECT button.

Adjustment dialog box will appear. Press POINT LEFT/RIGHT button to adjust value.

Fine sync

Adjusts an image as necessary to eliminate flicker from display. Press POINT LEFT/RIGHT button to adjust value.(From 0 to 31.)

Total dots

Number of total dots in one horizontal period. Press POINT LEFT/RIGHT button(s) and adjust number to match your PC image.

Horizontal

Adjusts horizontal picture position. Press POINT LEFT/RIGHT button(s) to adjust position.

Vertical

Adjusts vertical picture position. Press POINT LEFT/RIGHT button(s) to adjust position.

Current mode

Press SELECT button to show information of computer selected.

PC ADJUST Menu icon

Move a red frame icon to item and press SELECT button.

 

Shows status

Selected Mode

(Stored / Free) of

selected Mode.

 

Press POINT LEFT/RIGHT button to adjust value.

Press SELECT button at this icon to adjust “Clamp,” “Display area (H/V)” or set “Full screen.”

Clamp

Current mode

Adjusts clamp position. When image has a dark bar(s), try this adjustment.

Press SELECT button at Current mode icon to show information of computer connected.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents DP9295 To the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Features and Design ComputersColor Systems Component VideoPreparation Name of Each Part of ProjectorSETTING-UP Projector Connecting AC Power CordFor U.S.A. and Canada For Continental Europe 200 240 V ACPreparation Positioning Projector Room LightPreparation Adjustable Feet Moving ProjectorConnecting Projector USB Connector Series BTerminals of Projector BNC Input JacksConnecting to Computer Terminals A ProjectorConnecting to Video Equipment Operation of Remote Control Before OperationLaser Pointer Function Volume Button Wired Remote JackZoom Button Focus ButtonTOP Controls and Indicators Point Volume + / ButtonsHOW to Operate ON-SCREEN Menu Operating ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR Guide WindowSound Menu Turning on / OFF Projector Turning on ProjectorTurning OFF Projector Adjusting Screen Keystone AdjustmentBasic Operation Sound Adjustment Computer Input Selecting Input SourceSelecting Computer System Input MenuPC Adjustment Auto PC AdjustmentComputer Input Automatic MULTI-SCAN System AutoComputer Input Manual PC Adjustment Computer Input Display areaDisplay area H Full screenComputer Input Compatible Computer Specifications Resolution640 x 31.469 59.940 1024 x 48.363 60.004Picture Image Adjustments Image Level Select DirectImage Level Select Menu Image 1~4Computer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuVideo Input VideoPb/Cb,Pr/Cr Source Select Menu VideoComponent Video Signal Format Selecting Video SystemVideo Input PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-NCinema Image button Standard CinemaVideo Input Image Level Adjustment Reset Reset all adjustment to previous figure Quit Closes Image MenuSetting Setting MenuSetting Menu To change code of Remote Control Unit Wireless Mouse modeProjector mode To change code of ProjectorSETTING/APPENDIX Operating Wireless MouseInstallation Operating Wireless MouseMaintenance AIR Filter Care and CleaningCleaning Projection Lens Appendix Lamp Replacement Lamp Replace CounterTroubleshooting Remote Control Unit Wireless MouseDoes not work Function does notTechnical Specifications Appendix Configurations of Terminals USB Connector Series BWarranty Limitation and Exclusion Limitation of Liability 11/2002 610 304 0028 1AA6P1P3747-- MK3F

DP9295 specifications

The InFocus DP9295 is a state-of-the-art digital projector designed for a wide range of applications, including corporate presentations, educational environments, and large-scale events. This projector stands out due to its impressive combination of advanced features, robust technology, and user-friendly characteristics.

One of the main highlights of the DP9295 is its high-resolution capability. Boasting a native resolution of 1920x1080 pixels, it delivers stunningly clear images with rich detail and vibrant colors. This level of clarity is essential for presentations that include intricate graphics or high-definition videos, ensuring that every element is visible even in large venues.

The DP9295 employs advanced DLP (Digital Light Processing) technology, which enhances image quality through improved color accuracy and consistency. DLP is known for its reliability and longevity, making the InFocus DP9295 a dependable choice for long-term use. Furthermore, the projector features a brightness rating of 5000 ANSI lumens, allowing it to perform well even in well-lit environments. This high brightness ensures that images remain sharp and legible, providing a captivating viewing experience.

In addition to its impressive imaging capabilities, the InFocus DP9295 offers a versatile range of connectivity options. It includes HDMI, VGA, and USB ports, facilitating seamless connections to various devices such as laptops, desktops, and media players. This flexibility is crucial in today’s diverse tech landscape, where users often require compatibility with multiple devices.

Another noteworthy characteristic is the projector's robust sound system. Equipped with built-in speakers, the DP9295 delivers impressive audio quality that complements its high-definition visuals. This is particularly advantageous for presentations and multimedia displays, reducing the need for additional sound equipment.

The InFocus DP9295 also prioritizes user convenience, featuring a simple setup process and an intuitive interface. With options for remote control and easy navigation through menus, users can quickly adjust settings to achieve the desired output.

Additionally, energy efficiency is a critical concern in newer projector models. The DP9295 features eco-friendly modes that reduce power consumption without compromising performance, making it a sustainable choice for organizations.

In summary, the InFocus DP9295 is a powerful digital projector that combines high resolution, excellent brightness, versatile connectivity, and user-friendly features. Its advanced DLP technology and built-in sound system make it an ideal solution for anyone looking to make a lasting impression in their presentations or displays. Whether in a classroom, boardroom, or auditorium, the DP9295 is designed to meet diverse projection needs effectively.
Top Page Image Contents