Best Manufacturers PRO 600E manual To reuse the cartridge, Replacing the reservoirs

Page 51

NovaJet PRO 600e User's Guide

➪To reuse the cartridge

1Remove the cartridge from its garage by pulling back on the garage locking tab and gently taking out the cartridge.

2On the printer display panel, press Utility Menu then Access Cartridge.

3Snap the cartridge tube connector quick connect fitting into the fitting on the carriage.

4Insert the cartridge into its carriage stall, making sure that there are no kinks in the ink delivery line. (Refer to Chapter 2.)

5On the printer display panel, press Utility Menu then Access Cartridge to return the carriage to the service station.

6Run a prime to ensure that all jets are clear and operating correctly.

7If the cartridge leaked during storage or the cartridge lost negative pressure, you will need to reprime the cartridge with the NovaPrime to reestablish negative pressure. (Refer to Chapter 2.)

Note: Cartridges stored for extended periods of time will probably need to be cleaned, blotted and primed before use because the garages are designed only for short term cartridge storage.

Replacing the reservoirs

1Remove all the cartridges before replacing the ink reservoirs.

2Open the left front cover to access the reservoirs. Leave the caps on the reservoirs. Disconnect the quick connect fitting for each reservoir, noting the color of the fitting to which it was connected.

3Slide each reservoir forward to remove it from the printer.

Store the reservoirs away from direct sunlight in an environment similar to that of the printer.

4Replace the reservoirs with new reservoirs.

5Fill the reservoirs with ink and attach to the quick connect fittings primed for that type of ink.

4-4 Printer maintenance and storage

Page 50 Page 52
Image 51
Page 50 Page 52
Contents Users Guide For NovaJet PRO 600e Printers Warranty Claims Statement FCC Statement U.S.AMaterial safety data sheet Manual organization Appendix F Error messages Appendix G GlossaryContents Printing with NovaJet PRO 600e printers Introduction1Use the right inks and media Obtaining quality resultsCaring for your ink and cartridges GS Graphic Standard QIS InksGO Graphic Outdoor QIS Inks Caring for your media Choose the right mediaChoose the correct printing mode Use the right softwareNine Factors that Affect Print Quality Original Image Clarity and Color Original Image TypeScan Resolution Scanner TypePost Scanning Color Correction and Sharpening RIP Diffusion/Dither Patterns RIP Color ProfileCartridge Preparation and Alignment Ink and MediaThis page is intentionally blank Getting started Using the control panelPrinter control panel Setting the languageChoosing menu functions Loading mediaTo load roll media Using the power media feed and take-up systemTo use the take-up roll Using the take-up rollMoving the carriage Installing the cutterFilling the ink reservoirs To remove the cutterTo fill the ink reservoirs To install the ink cartridgesPriming the ink delivery lines To install tube needle assemblies and prime delivery linesGetting Started To print the color test Printing the color testPrinting the prime pattern To print the prime patternTo interpret the Prime pattern Clogged jets Aligning the ink cartridges To print the manual jet compensation listTo perform color deadband compensation To perform color calibrationHorizontal head-to-head test pattern Cartridge recognition About print drivers To clear cartridge recognition errorPausing the printer Canceling a printPrinter options Returning to the default settingsPrinting the settings Choosing print mode optionsPrinter Options NovaJet PRO 600e Users Guide To choose dpi Important notes about image size vs. dpiQuality modes Color modeTo choose print quality Print passesTo choose the media standard To change the number of passesTo change the print direction Choosing paper optionsGraphics U.S. Offset Media Sizes and Maximum Printing Areas for Rollfeed MediaMedia Sizes and Maximum Printing Areas for Sheet Media Margins Cut sheet maximum printing areaRollfeed maximum printing area Save Media To set auto-load delayTo set margins To set auto-cutTo turn off the wiper Defining user setupTo save user setup To turn off Save MediaTo choose a language Choosing ink optionsTo set ink reduction Dry time To enable the dryerTo set the ink preheat time To set the dry timeLCD Contrast To set LCD contrastThis page intentionally blank Refilling ink reservoirs Printer maintenance and storagePeriodic maintenance To fill the ink reservoirChanging ink types Removing and storing ink cartridgesTo remove and store cartridges Maintenance and Storage Replacing the reservoirs To reuse the cartridgeInstalling new cartridges Purging ink delivery linesTo purge ink delivery lines Components to annually inspect Periodic cleaningCleaning the ink cartridge jet plate To clean the ink cartridge jet plateTo clean the service station Cleaning the service stationAccessing printer information To replace the batteryTo clean the NovaPrime Returning the printer for serviceThis page intentionally blank Color Horizontal Head-to-Head Calibration CalibrationAColor calibration Current Heads Y, M, CDefining Calibration Units To adjust the color calibration valuesTo set calibration units To print the Paper Axis calibration test patternAppendices This page intentionally blank Acceptable Simm sizes Installing additional memoryTo remove the SIMMs To install the new SimmMenu tree Main menu at a glanceMain Menu Pause Feed media menuSetup menu at a glance Bold indicates the default Print Mode Setup menuPaper Option Menu Takeup defaultDefault = User User Setup MenuSerial Comm Menu Ink Option MenuUtility Utility menu at a glance Bold indicates the defaultUtility menu Bold indicates the default Service Menu Bold indicates the default Media Types Technical informationSpecifications Mini-Din-8 Plug Communications and cablingParallel cable RS-232 cable requirementsTo set the data bit Setting serial communications parametersTo set the baud rate To set the parity bitError messages Error MessagesCartridge Errors Error messages Glossary Plot area ResolutionParity PlatenNovaJet PRO 600e Ink and cartridges Ordering suppliesEncad media for NovaJet PRO 600e printers Encad supplies ordering informationQIS Premium Matte 100 gram Rolls only Inkjet media for NovaJet PRO 600e printersQIS Photo Gloss 7 mil QIS Photo Semi-Gloss 7 mil QIS Gloss 4 mil QIS Semi-Gloss 4 mil Matte PaperFilm SpecialtyQIS Specialty Matte 3 mil Rolls only QIS CAD 24 lb. Rolls onlyCut Sheet Media Roll Media on 2 diameter core Media Cores Media SamplesMedia Cutter pkg. TroubleshootingI Troubleshooting quick listIsolating problems Printer Health Automatic cutter doesn’t work or tears the paper Slow printing under WindowsTakeup roll doesnt turn Takeup roll doesnt stop turningING this Step Printer front viewCartridges leaking Cannot draw ink during initial siphonInitial siphon cannot be established Ink cartridges do not fire properlyInk spills on the flex cable What if I need a firmware upgrade?Cartridge spits small amounts of ink on paper Print QualityNo print appears Overall print quality is poorColors print as monochrome Color problems or shadowingStreak marks Line drawings exhibit bleedingColors are not correct or sections of print missing GhostingSplotchy area fill Image is the wrong sizePrint contains only partial image Jagged vertical linesData Transfer Parallel Connection Problems printing over a networkNo output when printing from Unix Serial RS-232/422 ConnectionIsolating a problem to your software Application SoftwareDifficulty generating prints ranging from a to E size Windows GDI Print Length Limitation Calling for Help Computer InformationCustomer Technical Support Encad BBS 619-452-2653Encad Technical Support Help Desk FAX Troubleshooting Index This page is intentionally blank Index Index-2

PRO 600E, 600E, PRO 600E, PRO 600E, 600E specifications

The InFocus PRO 600E series is a standout line of projectors designed to meet the needs of modern classrooms, meeting rooms, and home entertainment setups. These projectors deliver exceptional quality, versatility, and ease of use, making them an excellent choice for professionals and educators alike.

One of the main features of the InFocus PRO 600E is its high brightness level, which typically reaches up to 4000 ANSI lumens. This impressive brightness ensures that images remain clear and vibrant even in well-lit environments, eliminating the need to dim overhead lights during presentations or classrooms activities. Coupled with a high contrast ratio, the PRO 600E delivers sharp image quality, allowing for more detailed visuals that enhance audience engagement.

The PRO 600E is equipped with advanced DLP technology, known for its reliability and high-quality image output. DLP projectors like the PRO 600E provide minimal pixelation and a richer color palette, making them suitable for a variety of multimedia presentations, from text-heavy slides to colorful videos. The projector supports multiple resolution options, including XGA and WXGA, ensuring compatibility with a wide array of content.

Connectivity is another hallmark of the InFocus PRO 600E series. The projector offers multiple input options, including HDMI, VGA, and USB ports. This variety allows users to connect laptops, tablets, and other devices seamlessly, making it an ideal choice for collaborative environments. Some models in the series also support wireless connectivity, enabling presentations and video streaming without the hassle of cables.

In terms of user-friendliness, the PRO 600E features intuitive navigation controls and an easy-to-use menu system. Additionally, it is designed with portability in mind, allowing for straightforward setup and transport between venues. The lightweight build enhances its versatility, making it a favorable option for educators and business professionals who require a travel-friendly solution.

The projector also incorporates an efficient lamp life, often exceeding 10,000 hours, which significantly reduces maintenance costs and downtime. This longevity ensures that users can focus on their presentations and content rather than worrying about frequent bulb replacements.

In conclusion, the InFocus PRO 600E series excels in performance, adaptability, and ease of use. With its bright, high-quality image output, versatile connectivity options, and user-friendly features, it stands out as an excellent choice for diverse presentation needs in any setting. Whether in the classroom or a conference room, the PRO 600E demonstrates exceptional capability and reliability.
Top Page Image Contents