Setting the Picture ( PC )
In PC mode, you can adjust the H,
Geometry
You can change H,
1Press Menu/set button to display the main OSD menu.
2Select the picture main menu with CH+, CH- button.
3Press Menu/Set to enter the sub menu.
4Select Geometry and press Menu/Set to enter the sub menu. Then the picture Geometry sub menu will appear.
1Select the item to adjust with
2Press Menu/Set button.
3Then the cursor moves on the bar and you can adjust the value with
4To adjust these items, automatically, select Auto Adjust and press Menu/Set button.
ModeStandard
TemperatureNormal
Geometry
Phase
Native Mode | ON |
Auto Adjust
For more detail description refer to the next page.
OWNER'S MANUAL 35