InFocus TD40 PAL manual Connecting the VCR, Watching VCR

Page 20

Connecting the VCR

Connecting the VCR

With SCART (Euro cable)

Connect a SCART cable to the SCART jacks of the VCR and the Monitor.

With S-Video

Connect a S-Video cable to the S-Video jacks of the VCR and the Monitor.

Connect L (White), R (Red) sound cable (composite) to the sound jacks of the VCR and the Monitor.

With AV input

Connect a composite cable to the AV video jacks of the VCR and the Monitor.

Connect L (White), R (Red) sound cable (composite) to the sound jacks of the VCR and the Monitor.

Watching VCR

1Press INPUT button on the remote control and select Video Sources.

2Insert a video tape into the VCR and press the PLAY key on the VCR.

•To avoid picture noise (interference), leave an adequate distance(over 3m) between the VCR and monitor.

•When connecting the Monitor with external equipment, match the colour of connecting ports(e.g. Video -yellow, Audio(L) -white, Audio(R) - red).

•If you have a mono VCR, connect the audio cable from the VCR to the AUDIO(L/MONO) input of the Monitor.

•If you connect an S-VHS VCR to the S-VIDEO input socket, you can get a better picture quality than normal video input (AV).

OWNER'S MANUAL 19

Image 20

Contents USER’S Guide Contents Setting the Picture FCC Notice Page Important Safety Information Follow all operating and use instructionsImportant Safety Information Important Safety Information Only use the specified batteries Accessories Viewing the Control PanelOSD Key Position OSD Key FunctionViewing the Connecting Panel Back Panel and JacksRS-232C Configurations RGB PC Input Jack D-SUBViewing the Remote Control Key DescriptionTTX / program Edit keys PIP Picture In Picture KeysLeft Up Reception range of remote control Loading the BatteriesInstallation Table Stand Installation optionalSpeaker Installation optional Speaker AccessoriesConnecting the TV Cable Connecting the TV CableWatching VCR Connecting the VCRConnecting the VCR Connecting the DVD Connecting the DVDHow to use Component Input portsConnecting the Set Top Box How to connectSupported Signals With ComponentConnecting the PCD-Sub & DVI Connecting a PC to the MonitorPin Configuration Pin NoDisplayable Monitor Specification Vertical Frequency HzVolume Control Basic OperationTurning the Monitor On And Off Select SourceOSD Menu Structure Example of OSD MenuMain Menu Sub MenuSetting the Channel Auto ScanAuto Scan Supported countries are shown as belowAuto Scan Other Countries NationManual Scan Fine TuneEdit Edit Favorite program ListDigest Function DigestTeletext On / Mix / Off TOP textMode Setting the PictureUser mode has additional settings in a sub-menu See next Adjust User Mode Select User mode PreviousContrast Temperature Cool 1Normal Warm 1Setting the Picutre Video NRScreen Format Video NRZoom Screen Format Description WidePanorama Setting the Picture PC GeometryPosition Phase Balance Setting the SoundSound Mode Spatial Effect User AdjustAVC Auto Volume Control MTS Multichannel Telersion SoundPIP Picture In Picture Setting the OthersTranslucent Size in PIP Picture In Picture Source in PIPPicture Swap in PIP Picture In Picture Position in PIPAdvanced Set ID in AdvancedFront key Lock in Advanced Blue Back in AdvancedLanguage in Advanced On Time Setting the TimeTime Set On Channel On VolumeAvailable only when the Time is set and On Time is on Off Time SleepTroubleshooting Problem Quick Action for Possible SolutionWarranty Card Limited WarrantyTo Obtain Warranty Service Limited Warranty PeriodTo Be Eligible For Limited Warranty Coverage Memo