InFocus TD40 PAL manual Setting the Others, Translucent, PIP Picture In Picture

Page 44

Setting the Others

In SET UP menu, you can adjust the transparency of the OSD menu and set PIP and others.

Translucent

Adjust the transparency of the OSD menu. There are 8 step from OFF to 7.

1Press Menu/set button to display the main OSD menu.

2Select the SET UP main menu with PG+ / PG- button on the remote control.

3Press Menu/Set button to enter the sub menu.

4Select Translucent and press VOL+ button to enter the parts. Then the cursor moves into the

parts.

5Adjust with PG+ & PG- button and press EXIT button.

TranslucentOFF

PIP

Advanced

PIP (Picture In Picture)

You can watch two programs or sources at the same time. And set up PIP size and position.

1Press Menu/set button to display the main OSD

menu.

TranslucentOFF

2	Select the SET UP main menu with PG+ / PG-


3	button on the remote control.					PIP
	button on the remote control.					PIP
	Press Menu/Set button to enter the sub menu.
	Press Menu/Set button to enter the sub menu.

Advanced

4 Select PIP and press Menu/Set button to enter the sub menu. Then the PIP sub menu appear.

PIP Window

	Size	SMALL
	Size	SMALL
	Source



	Picture Swap


	Position

OWNER'S MANUAL 43

Image 44

Contents USER’S Guide Contents Setting the Picture FCC Notice Page Important Safety Information Follow all operating and use instructionsImportant Safety Information Important Safety Information Only use the specified batteries Accessories Viewing the Control PanelOSD Key Position OSD Key FunctionViewing the Connecting Panel Back Panel and JacksRS-232C Configurations RGB PC Input Jack D-SUBViewing the Remote Control Key DescriptionTTX / program Edit keys PIP Picture In Picture KeysLeft Up Reception range of remote control Loading the BatteriesInstallation Table Stand Installation optionalSpeaker Installation optional Speaker AccessoriesConnecting the TV Cable Connecting the TV CableWatching VCR Connecting the VCRConnecting the VCR Connecting the DVD Connecting the DVDHow to use Component Input portsConnecting the Set Top Box How to connectSupported Signals With ComponentConnecting the PCD-Sub & DVI Connecting a PC to the MonitorPin Configuration Pin NoDisplayable Monitor Specification Vertical Frequency HzVolume Control Basic OperationTurning the Monitor On And Off Select SourceOSD Menu Structure Example of OSD MenuMain Menu Sub MenuSetting the Channel Auto ScanAuto Scan Supported countries are shown as belowAuto Scan Other Countries NationManual Scan Fine TuneEdit Edit Favorite program ListDigest Function DigestTeletext On / Mix / Off TOP textMode Setting the PictureUser mode has additional settings in a sub-menu See next Adjust User Mode Select User mode PreviousContrast Temperature Cool 1Normal Warm 1Setting the Picutre Video NRScreen Format Video NRZoom Screen Format Description WidePanorama Setting the Picture PC GeometryPosition Phase Balance Setting the SoundSound Mode Spatial Effect User AdjustAVC Auto Volume Control MTS Multichannel Telersion SoundPIP Picture In Picture Setting the OthersTranslucent Size in PIP Picture In Picture Source in PIPPicture Swap in PIP Picture In Picture Position in PIPAdvanced Set ID in AdvancedFront key Lock in Advanced Blue Back in AdvancedLanguage in Advanced On Time Setting the TimeTime Set On Channel On VolumeAvailable only when the Time is set and On Time is on Off Time SleepTroubleshooting Problem Quick Action for Possible SolutionWarranty Card Limited WarrantyTo Obtain Warranty Service Limited Warranty PeriodTo Be Eligible For Limited Warranty Coverage Memo