Displaying a computer source image
Remove the lens cap.
Toggle the Power switch on the side of the projector to the On position.
The LED flashes green and the fans start to run. When the lamp comes on, the start up screen displays and the LED is steady green. It can take a minute for the image to achieve full brightness.
? No start up screen? Get help on page 21.
remove lens cap
toggle Power switch
Turn on your computer.
The computer’s image should appear on the projection screen. If it doesn’t, press the Computer button on the projector’s keypad.
If your computer has Windows 98 as its operating system, see “Using the projector with Windows 98 for the first time” on page 14 regarding the driver setup process.
Make sure your laptop’s external video port is active.
Many laptops do not automatically turn on their external video port when a projector is connected. Usually a key combination like FN + F8 or CRT/LCD key turns the external display on and off. Locate a function key labeled CRT/LCD or a function key with a monitor symbol. Press FN and the labeled function key simultaneously. Refer to your laptop’s documenta- tion to learn your laptop’s key combination.
?No laptop image? Try pressing the Auto Image button on the key- pad. Get help on page 22.
turn on computer
activate laptop’s external port
monitor key
or LCD/CRT key
FN key
12