IN5122/IN5124

Projector

RS232 Command and Control Guide

The signals listed on the following pages are used for initial setup, however the signal timings of some computer models may be different. In such a case, adjust V POSITION and H POSITION in the IMAGE menu.

Back porch (B)

Front porch (D)

Back porch (b)

Front porch (d)

Data

Active video (C)

Data

Active video (c)

H. Sync.

Sync (A)

V. Sync.

Sync (a)

NOTES • Be sure to check jack type, signal level, timing and resolution before connecting this projector to a PC.

•Some PCs may have multiple display screen modes. Use of some of these modes will not be possible with this projector.

•Depending on the input signal, full-size display may not be possible in some cases.

•Although the projector can display signals with resolution up to UXGA (1600x1200), the signal will be converted to the projector’s panel resolution before being displayed. The best display performance will be achieved if the resolutions of the input signal and projector panel are identical.

•Automatic adjustment may not function correctly with some input signals.

•The image may not be displayed correctly when the input sync signal is a composite sync or a sync on G.