U s i n g | t h e | P r o j e c t o r |
|
|
|
NOTE: If you can’t aim the remote control at the projector so that its signal is received — for example, when using rear projection — connect it directly to the projector with the optional remote control cable. See “Optional Accessories” on page 46.
Using the Remote Control
Point the remote control at the projection screen or at the front or rear of the projector. The range for optimum operation is about 40 feet. If you point the remote at the projection screen, the dis- tance to the screen and back to the projector must be less than or equal to 40 feet. For best results, point the remote directly at the front or the rear of the projector.
The remote has a disk mouse, two mouse buttons, and several feature buttons. Press anywhere on the edge of the disk mouse to move the cursor on the screen. You can move the cursor at any angle by pressing the corresponding edge of the disk.
Using the Remote and Keypad Buttons
This section provides a reference to the keypad and remote but- tons.
FIGURE 13
Remote
16