InFocus LS700 warranty Using the Menus

U s i n g t h e P r o j e c t o r

Using the Menus

The projector has six drop-down menus that allow you to make image adjustments and change a variety of settings. Most of these adjustments aren’t available directly from the keypad.

FIGURE 15

On-screen menus

To open the on-screen menus, press the menu button on the remote or keypad. Press menu again when you want to close the menus and save any changes.

To select a menu, use the disk mouse on the keypad or remote to move the cursor left and right to highlight the menu you want. The drop-down menu appears.

disk mouse

left mouse	right mouse
button	button

FIGURE 16

Disk mouse and mouse buttons on keypad and remote

To change a menu setting, use the disk mouse to move the cursor up and down to the setting you want to change (the setting is highlighted red), then use the left and right mouse buttons to adjust a setting or select an option. Some submenus, such as Brightness, consist of a slider bar you use to increase or decrease a value; some submenus, such as Standby Time, consist of options you scroll through to select the desired one. All changes are saved when you close the menus.

20