M a i n t e n a n c e | & | T r o u b l e s h o o t i n g |
|
|
|
Problem: Image seems stretched from top to bottom.
•Your video is in anamorphic 16x9 format. Press the Video 2 but- ton on the remote to toggle between 4x3 and 16x9 formats. See page 18.
Problem: Image looks too red or blue.
•Change the Color Temperature. See “Color Temperature” on page 22.
Problem: no sound when no external speakers connected
•Press the mute button.
•Adjust volume.
•Verify audio/input connections. Make sure external speakers are connected, as the projector does not have internal speakers.
•Adjust audio source.
Problem: Only the
•Verify that the cables are connected correctly. Check to see that the CableWizard computer cable is correctly connected to the monitor connector on the computer (this is the connector where your monitor cable usually goes.) See page 10 for con- nection procedures.
•Verify that the proper input source is connected. See “Com- puter” on page 17 or “Video” on page 18.
•You might need to turn everything off and power up the equip- ment again. Make sure you power up in this order: projector, computer monitor, computer or video player. It is especially important that you follow this sequence for Macintosh comput- ers.
•Make sure your computer’s graphics board is installed and configured correctly.
If you’re using Windows 3.x:
1In the Windows Program Manager,
2Verify that the Display setting is 1024x768 or less.
38