InFocus LP860, LP840, LP850 manual Adjusting the image

Page 15

LP840-850-860 User's Guide-02.fm Page 13 Friday, February 25, 2005 12:58 PM

Adjusting the image

 

adjust height

release

release

Adjust the height of the projector, if necessary, by pressing the release but-

 

button

button

tons on each side of the projector’s front to extend the elevator feet.

 

 

 

 

 

elevator

elevator

 

 

foot

foot

Position the projector the desired distance from the screen at a 90 degree

adjust distance

 

 

angle (perpendicular) to the screen.

 

 

 

 

 

See page 43 for a table listing screen sizes and distances.

Adjust the zoom or focus by pressing the power Zoom or power Focus

adjust zoom and focus

 

 

 

 

 

 

 

 

 

buttons on the keypad until the desired image size and focus are produced.

zoom focus

 

You can also adjust the zoom and focus via the menus. See page 32

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If the image is not on the screen or viewing area, adjust it by pressing the lens shift button on the keypad.

Press the upper Lens Shift button to shift the lens upward. Press the lower Lens Shift button to shift the lens downward.

You can also adjust the lens shift via the menus. See page 32.

adjust lens shift

lens shift

Adjust the Contrast or Brightness in the Picture menu.

adjust Contrast or Brightness

contrast

See page 31 for help with the menus.

brightness

13

Image 15
Contents USER’S Guide Page ÅÉë=áåëíêìÅíáçåëK= Trademarks Table of Contents Important Operating Considerations for Safety Introduction Connector Panel Positioning the projector Connecting a computer Required computer connectionsOptional computer connections Visit our website for information on ProjectorNet Displaying a computer image First-time projector use with Windows For Windows 2000, Windows ME, and Windows XP Wizard launches two timesAdjusting the image Connecting a video device Standard video connectionsOptional video connections Connect BNC cables Displaying a video image Lens shift button on the keypad Screen Save Troubleshooting your setupPower Save Shutting down the projectorComputer image projected Source Troubleshooting Problem SolutionRange Out Image clear and not cropped Page Color Lamp won’t turn on, Temp LED solid red Lamp won’t turn on, Lamp LED blinking redLamp may need to be replaced Lamp turns on Still having problems? Using the keypad buttons Troubleshooting the remote Using the remote controlUsing the audio Troubleshooting audioConnecting external speakers Optimizing computer images Presentation featuresCustomizing the projector Optimizing video imagesUsing the menus Picture menu Save Settings Presets Advanced settings Settings menu Screen Save PiP Enable PiP Position Effect Key Network Maintenance Cleaning the lensChanging the lens Replacing the projection lamp Resetting the lamp timer Cleaning the dust filter Using the security lockTroubleshooting Appendix Projected image sizeWidth Image Feet/m LED color/behavior Meaning LED BehaviorSetting Value RS-232 commandsCommunication Configuration Command FormatLimitations Error ConditionsINT at RW Disable Enable IR Receiver front IRF at RW = Japanese = Korean = Portuguese = Russian = Norwegian NND Page Ntsc Numerics IndexPage XGA Warranty Limitation and Exclusion Limited WarrantyDisclaimer of Unstated Warranties If YOU Need Assistance USER’S Guide
Related manuals
Manual 56 pages 11.64 Kb