InFocus LP860, LP840, LP850 manual PiP Enable PiP Position Effect Key

LP840-850-860 User's Guide-02.fm Page 37 Friday, February 25, 2005 12:58 PM

PiP: (Picture in Picture) allows you to overlay a smaller window showing the video source on top of the larger computer source window. Only video sources 2 and 3 (composite and S-video) support PiP. You must have both a computer and video source connected to use PiP. You can’t show a com-

puter image in the smaller PiP window, only a video image. You can select a PiP menu small, medium, or large window. You can also move the PiP window on the

screen using the PiP Position X and Y options, or the Upper left, Upper Right, Lower Left, or Lower Right options in the menu. Press the up and down arrows to change the position.

Effect Key: allows you to assign a different function to the Effect button on the remote to quickly and easily use the effect. Only one effect can be enabled at a time. Highlight an effect and press Select to choose a different one.

Blank: shows an empty screen.

Mute: turns off all sound.

Aspect Ratio: sets the ratio of the image width to image height.

Source: cycles through the available sources.

Auto Image: causes computer sources to be reacquired.

Freeze: pauses the projected image.

Magnify: Is the default effect. It allows you to enlarge a section of the projected image.

About: displays the About menu.

PiP Source: changes the video source of Picture in Picture smaller win- dow display on the projected screen.

37

PiP Enable

PiP Position

Effect Key