Using the Projector, Basic Image Adjustment

USING THE PROJECTOR

This section describes how to use and make adjustments to the projector. It also provides a reference to the keypad buttons and the options available from the on-screen menus.

Basic Image Adjustment

1Make sure you have powered up your equipment in the right order (page 21).

2If the image doesn’t display completely, adjust the height and tilt of the projector (page 25), zoom the image (page 25), or center the image by adjusting its horizontal or vertical posi- tion (page 36).

3If the image is out of focus, rotate the lens to focus it (page 25).

4If the image appears to shimmer or if it has blurry vertical bars after you have adjusted the focus, turn Auto Image (page 35) off and then back on to reset the automatic sync and tracking. If that doesn’t clear up the image, adjust the sync (page 36) and/or the tracking (page 36) manually.

5If the colors don’t look right, adjust the brightness (page 27) and tint (page 31).

Using the Remote Control

Point the remote control at the projection screen or at the front or rear of the projector. The range for optimum operation is about 40 feet. If you point the remote at the projection screen, the dis- tance to the screen and back to the projector must be less than or equal to 40 feet. For best results, point the remote directly at the front or the rear of the projector.

The projector ships with a two-button remote. (A full-feature Smart Remote with all the same buttons as the keypad is avail- able separately; see “Optional Accessories” on page 52.) The remote has a disk mouse and two mouse buttons, one on the top of the remote and one on the bottom.

NOTE: In Focus has created a software program called In Focus Presents that automatically opti- mizes your computer’s display when used with any In Focus pro- jector. This free program is included with every projector and available for download from our website at www.infocus.com.

NOTE: If you can’t aim the remote control at the projector so that its signal is received — for example, when using rear projec- tion — purchase the optional Smart Remote and connect it directly to the projector with the optional remote control cable. See “Optional Accessories” on

page 52.