InFocus LP 725, LP 735 warranty Controls Menu Functions

Controls Menu Functions

FIGURE 31

Controls menu

Video Standard

When Auto is on, the projector attempts to pick the video stan- dard (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, or SECAM) auto- matically based on the input signal it receives. (The video standard options may vary depending on your region of the world.) The input signals for SECAM, PAL-M, and PAL-N video cannot be automatically detected, therefore they must be chosen manually. If the projector is unable to detect the standard, the col- ors might not look right or the image might appear “torn.” If this happens, manually select a standard by clicking the button and cycling through the standards.

Standby TIme

This option lets you select how long the lamp stays on and the blank screen is displayed when you enter standby mode before the projector turns off. Select among 1, 5, 10, and 15 minutes by clicking the button and cycling through the options.

NOTE: If you already know the video standard used in your geo- graphical area, it’s often best to manually select it.

37